Cabview - Position des Hebels in Texture - Elvas Tower

Cabview - Position des Hebels in Texture Rate Topic:

#41 Icik

Conductor

Group: Status: Active Member
Posts: 308
Joined: 19-April 15
Simulator:Open Rails
Country:

Posted 26 October 2016 - 01:10 PM

This controler should oscillate NumPositions 6,5,6,5,6,5,6,5,6,5...and then 3,2,1,0.
But it seems to misses frame. In MSTSbin it does work correctly.

CombinedControl (
Type ( CP_HANDLE COMBINED_CONTROL )
Position ( 150 338 237 122 )
Graphic ( ../../common.cab/cab240zssk/240_kontroler.ACE )
Style ( NONE )
MouseControl ( 1 )
NumFrames ( 8 2 4 )
NumPositions ( 134 0 1 2 3 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6)
NumValues ( 134 0 0.08 0.14 0.19 0.249 0.25 0.269 0.27 0.299 0.3 0.329 0.33 0.359 0.36 0.389 0.39 0.419 0.42 0.459 0.46 0.489 0.49 0.519 0.52 0.539 0.54 0.569 0.57 0.589 0.6 0.629 0.63 0.649 0.65 0.679 0.68 0.709 0.71 0.739 0.74 0.759 0.76 0.789 0.79 0.809 0.81 0.839 0.84 0.859 0.86 0.879 0.88 0.899 0.9 0.919 0.92 0.949 0.95 0.959 0.96 0.969 0.97 0.974 0.975 0.979 0.98 0.989 0.99 1 1.001 1.01 1.011 1.02 1.021 1.025 1.026 1.03 1.031 1.04 1.041 1.05 1.051 1.08 1.081 1.1 1.101 1.12 1.121 1.14 1.141 1.16 1.161 1.19 1.191 1.21 1.211 1.24 1.241 1.26 1.261 1.29 1.291 1.32 1.321 1.35 1.351 1.37 1.371 1.4 1.401 1.43 1.431 1.46 1.461 1.48 1.481 1.51 1.511 1.54 1.541 1.58 1.581 1.61 1.611 1.64 1.641 1.67 1.671 1.7 1.701 1.73 1.731 1.75 1.751 )
Orientation ( 0 )
DirIncrease ( 0 )
)

#42 Csantucci

Member, Board of Directors

Group: Status: Elite Member
Posts: 7,014
Joined: 31-December 11
Gender:Male
Country:

Posted 27 October 2016 - 01:35 AM

I've checked. I'ts a problem of precision. I'll see if something can be done.

#43 Csantucci

Member, Board of Directors

Group: Status: Elite Member
Posts: 7,014
Joined: 31-December 11
Gender:Male
Country:

Posted 27 October 2016 - 02:00 AM

X.3655 should have fixed this.

#44 Icik

Conductor

Group: Status: Active Member
Posts: 308
Joined: 19-April 15
Simulator:Open Rails
Country:

Posted 27 October 2016 - 02:35 AM

Can I check that? Pls give me here your patch.

#45 Csantucci

Member, Board of Directors

Group: Status: Elite Member
Posts: 7,014
Joined: 31-December 11
Gender:Male
Country:

Posted 27 October 2016 - 03:31 AM

Download x.3654 and replace attached files.

Runactivities.zip (621.51K)
Number of downloads: 157

#46 Icik

Conductor

Group: Status: Active Member
Posts: 308
Joined: 19-April 15
Simulator:Open Rails
Country:

Posted 27 October 2016 - 04:07 AM

Yes, it looks better.
But frame for EDB controler is not functional. It must be displayed when dynamic brake is operating.

Lever (
Type ( CP_HANDLE COMBINED_CONTROL )
Position ( 118 355 84 58 )
Graphic ( ..//..//common.cab//cab240zssk//240_EDB.ace )
Style ( NONE )
MouseControl ( 0 )
NumFrames ( 2 2 1 )
NumPositions ( 134 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 )
NumValues ( 134 0 0.08 0.14 0.19 0.249 0.25 0.269 0.27 0.299 0.3 0.329 0.33 0.359 0.36 0.389 0.39 0.419 0.42 0.459 0.46 0.489 0.49 0.519 0.52 0.539 0.54 0.569 0.57 0.589 0.6 0.629 0.63 0.649 0.65 0.679 0.68 0.709 0.71 0.739 0.74 0.759 0.76 0.789 0.79 0.809 0.81 0.839 0.84 0.859 0.86 0.879 0.88 0.899 0.9 0.919 0.92 0.949 0.95 0.959 0.96 0.969 0.97 0.974 0.975 0.979 0.98 0.989 0.99 1 1.001 1.01 1.011 1.02 1.021 1.025 1.026 1.03 1.031 1.04 1.041 1.05 1.051 1.08 1.081 1.1 1.101 1.12 1.121 1.14 1.141 1.16 1.161 1.19 1.191 1.21 1.211 1.24 1.241 1.26 1.261 1.29 1.291 1.32 1.321 1.35 1.351 1.37 1.371 1.4 1.401 1.43 1.431 1.46 1.461 1.48 1.481 1.51 1.511 1.54 1.541 1.58 1.581 1.61 1.611 1.64 1.641 1.67 1.671 1.7 1.701 1.73 1.731 1.75 1.751 )
Orientation ( 0 )
DirIncrease ( 0 )

)

#47 Csantucci

Member, Board of Directors

Group: Status: Elite Member
Posts: 7,014
Joined: 31-December 11
Gender:Male
Country:

Posted 27 October 2016 - 04:55 AM

Icik,
you know why it's so. It's because in the .eng file you have

Combined_Control ( 0 1 1 1 throttle dynamic )

That way the whole range is reserved to the throttle.
If you want to have also the dynamic brake part active, modify above line so

Combined_Control ( 0 1 0.5 0.5 throttle dynamic )

and halve all NumValues() parameters in the .cvf file.

#48 Icik

Conductor

Group: Status: Active Member
Posts: 308
Joined: 19-April 15
Simulator:Open Rails
Country:

Posted 27 October 2016 - 10:43 AM

Mr. Csantucci,
I found a problem with function TwoState by Style( ONOFF ). It seems that OpenRails can do ON but no OFF.
Pls check this.

Here an example:
TwoState (
Type ( WIPERS TWO_STATE )
Position ( 143 313 94 18 )
Graphic ( ../../common.cab/cab240zssk/240_K_maska.ace )
NumFrames ( 1 1 1 )
Style ( ONOFF )
MouseControl ( 0 )

)

#49 Csantucci

Member, Board of Directors

Group: Status: Elite Member
Posts: 7,014
Joined: 31-December 11
Gender:Male
Country:

Posted 27 October 2016 - 11:54 AM

I don't see it working in MSTS either.

#50 copperpen

Executive Vice President

Group: Status: Elite Member
Posts: 3,144
Joined: 08-August 05
Gender:Male
Simulator:MSTS & OR
Country:

Posted 27 October 2016 - 12:38 PM

Twostate must be working in OR because the default Dash9 horn is a twostate switch onoff

TwoState (
Type ( HORN TWO_STATE )
Position ( 106 425 30 21 )
Graphic ( "Horn.ace" )
NumFrames ( 2 2 1 )
Style ( ONOFF )
MouseControl ( 1 )
)

8 Pages
« First
←
3
4
5
6
7
→
Last »

You cannot start a new topic
You cannot reply to this topic

Elvas Tower: Cabview - Position des Hebels in Texture - Elvas Tower