I need to examine the whole logfile to try to help you. Can you attach it here?
If you can send to me the two complete trainsets, this could help too.
Cruise control
#222
Posted 16 August 2023 - 02:17 PM
Hello Carlo. At the moment I attach the .log file, but it is the same as what I already put. I think I'll have to send you the vehicles....
OpenRailsLog.txt (46.93K)
Number of downloads: 75
OpenRailsLog.txt (46.93K)
Number of downloads: 75
#223
Posted 17 August 2023 - 01:57 AM
I see this warning in the logfile:
This points to a syntax error in the .eng file.
Warning: Expected depth 0; got depth 1 at end of file (missing ')'?) in C:\Train Simulator New\trains\trainset\PLATANITO\RN443_BA1.eng:line 810
This points to a syntax error in the .eng file.
#224
Posted 17 August 2023 - 04:18 AM
Hello!
Thanks Carlo, I have solved that but nothing, still exactly the same thing is happening. I'm going to send you the complete train, although it is now under construction and only one of the 3D cabins has the correct controls implemented. In that cabin, the front one, the LED screens are not tilted yet (that you have to do editing the .s file by hand). The other cockpit is exactly the same as before.
I take this opportunity to explain also the other problem I have experienced: when I add the alternative views to one of the 3D cockpits (or both), the simulator closes when changing cockpits.
Now I prepare the file to send you its link privately...
Thanks Carlo, I have solved that but nothing, still exactly the same thing is happening. I'm going to send you the complete train, although it is now under construction and only one of the 3D cabins has the correct controls implemented. In that cabin, the front one, the LED screens are not tilted yet (that you have to do editing the .s file by hand). The other cockpit is exactly the same as before.
I take this opportunity to explain also the other problem I have experienced: when I add the alternative views to one of the 3D cockpits (or both), the simulator closes when changing cockpits.
Now I prepare the file to send you its link privately...
#225
Posted 17 August 2023 - 09:03 AM
The Cruise Control does not work because in your .eng files the EngineControllers block has no closing parenthesis. You must add one after the BellToggle line.
Now checking the Alternate cab viewpoints problem.
Now checking the Alternate cab viewpoints problem.
#226
Posted 18 August 2023 - 11:15 PM
Re the alternate 3D cab viewpoints, there is a bug in OR. Here I attach a fix for ORNYMG 145.
Orts.Simulation.zip (1.01MB)
Number of downloads: 68
Orts.Simulation.zip (1.01MB)
Number of downloads: 68
#227
Posted 19 August 2023 - 10:52 AM
Hello again!
Thank you very much for your help and your time for this, Carlo. This warning was not appearing in the .log and was driving me crazy! I think the program I use to edit engs, wags and cvf, Notepad++, sometimes deletes the parentheses just because.
I'm sorry I didn't reply sooner, I was really more aware of the Elvas Tower Messenger than the Forum...
At least I'm glad to have warned about the error with the 3d virtual cockpit views. With these fixes, the model has advanced a lot thanks to you. Best regards!
Thank you very much for your help and your time for this, Carlo. This warning was not appearing in the .log and was driving me crazy! I think the program I use to edit engs, wags and cvf, Notepad++, sometimes deletes the parentheses just because.
I'm sorry I didn't reply sooner, I was really more aware of the Elvas Tower Messenger than the Forum...
At least I'm glad to have warned about the error with the 3d virtual cockpit views. With these fixes, the model has advanced a lot thanks to you. Best regards!
#228
Posted 11 November 2023 - 12:01 PM
Hello everyone. A question. Will the CC also be available in Open Rails version 1.5?
#229
Posted 11 November 2023 - 12:29 PM
>I use to edit engs, wags and cvf, Notepad++, sometimes deletes the parentheses just because.
I have used notepad++ for a long time, it has never deleted anything by itself.
More likely you have marked some text and mistakenly marked a close brace.
I use jedit for brace checking single files, and an old program of mine for brace checking an MSTS/or install.
I have used notepad++ for a long time, it has never deleted anything by itself.
More likely you have marked some text and mistakenly marked a close brace.
I use jedit for brace checking single files, and an old program of mine for brace checking an MSTS/or install.
#230
Posted 12 November 2023 - 07:42 AM
CC is available in all current official OR versions, as well as in ORNYMG of course.