[gammaray84]

Thank you very much for the info, Slipperman.
I will keep my eye on it. Also will try to figure out if i can do something about it.
Looks like a good statring point.

Cheers, Gamma :sign_thanks:

[Csantucci]

Revision 77 of OR NewYear MG is available here http://www.interazio...loads/index.php .

This unofficial version has been derived from the latest official Open Rails unstable revision U2020.10.01-2006 (which does NOT include Monogame)
and from the latest official OpenRails testing revision X1.3.1-X1.3.1-220.
To see what the official unstable release includes, check here https://james-ross.c...&utm_medium=app .

The list of additional features to such unstable release present in OR NewYear MG is as follows:

- MONOGAME
- addition of track sounds in the sound debug window (by dennisat)
- F5 HUD scrolling (by mbm_or)
- checkbox in General Options tab to enable or disable watchdog
- increase of remote horn sound volume level
- when car is selected through the F9 window, the car's brake line in the extended brake HUD is highlighted in yellow (by mbm_or)
- improved distance management in roadcar camera
- signal script parser (by perpetualKid): reduces CPU time needed for signal management
- true 64-bit management, allowing to use more than 4 GB of memory, if available, in Win64 systems (mainly by perpetualKid)
- general options checkbox for optional run at 32 bit on Win64 (to avoid slight train shaking bug)
- translatable Train Driving Info window (see http://www.elvastowe...post__p__251671 and following posts), by mbm_OR
- extended Raildriver setup, as present in OR Ultimate (by perpetualKid)
- analog clocks showing game time, see http://www.elvastowe...station-clocks/ , by jonas
- bug fix for bad mouse pointing in full screen mode and for issues with Fast full screen-Alt-Tab mode
- Webserver operating also with IPv4 addresses, that is on external devices, by mbm_OR, cjakeman and BillC
- panto commands and animations now swapped when in rear cab
- improvements in Activity Evaluation of station stops, by mbm_OR
- correction to reduce transfer flickering at short distance
- allow passing a red signal for shunting through dispatcher window, see https://trello.com/c...spatcher-window , by césarbl
- Fix memory usage indication that was clamped to 4 GB, see http://www.elvastowe...post__p__257699
- option to skip saving commands (reduces save time on long activities), see http://www.elvastowe...post__p__257687
- skip warning messages related to ruler token, that is introduced by TSRE5
- General Option to reduce memory usage
- Bug fix for https://bugs.launchp...or/+bug/1877644 SPEED signals not being updated in multiplayer clients. By cesarbl
- Avoid 3D cab stuttering by a mutable shape primitive, by YoRyan
- bug fix for memory leak, see http://www.elvastowe...al-memory-leak/
- track gauge can be changed over the whole route, see http://www.elvastowe...ng-track-gauge/
- first edition of management of ORTS_POWERKEY and ORTS_BATTERY cab controls, by Paolo
- re-introduced advanced coupling, by steamer_ctn
- faster loading of Raildriver options page, by perpetualKid
- improved TrainInfo management for TCS, hints by gpz
- bug fix for https://bugs.launchp...or/+bug/1895391 Calculation of reversal point distance failing, see also http://www.elvastowe...oint-set-to-1/.





Instructions and additional files to use the AWS TCS are available here http://www.elvastowe...post__p__255510 .


Users having not more than 4 GB RAM are suggested to run selecting general options checkbox for optional run at 32 bit on Win64.

When running on Win64, the player can select if he prefers running at 64 bit or 32 bit. In this second case RunActivity32.exe is run, and only a maximum of 4 GB of RAM can be accessed by OR. If the computer has only 4 GB RAM, selecting the option to run at 32 bit on Win64 is recommended.
Note for developers: Runactivity32.exe is not generated by building the pack, but manually doing a copy of Runactivity.exe, renaming it Runactivity32.exe, and using on the Developer Command Prompt command corflags with the modifier -32BITPREF+


NOTE: ReShade 4.3.0 or older or ReShade later than 4.5.2 must be used. ReShade 4.4.2 doesn't work here. See here http://www.elvastowe...mg-and-reshade/ for an installation guide of ReShade.

When running on Win64, if you are running OR at 64 bit (option not checked) you must point ReShade to OpenRails64.exe; if you are running OR at 32 bit (option checked) you must point ReShade to OpenRails.exe.

It is suggested to unpack the .zip using 7zip, if other unpackers lead to problems.

Instructions for web server:
What you can do now to test it: check the general options checkbox Enable WebServer, and start OR. If you type
http://127.0.0.1:2150/index.html
in your browser of the same PC where OR runs, you'll get a web page with the OR HUD.
You can display the same page also on other PCs, or devices like an Android Smartphone or TV box, or an IPad. In this case however, within the Command prompt you must type ipconfig; you will get some lines as reply, and one of them is
IPv4 Address. . . . . . . . . . . : 192.168.1.114
So, in such case, on the browser of your external device (being in the same internal network of your PC) you will have to type
http://192.168.1.114:2150/index.html

Revision 76 can still be downloaded from here http://www.interazio...loads/index.php (click on OR_NewYear_MG_oldrecent.zip) .

[Denis Gionet]

Hi Carlo,

I am currently running version 77 and for a while now, I cannot run OR_MG at 64-bit. I have 16GB of RAM and Win 10 64-bit. Is there something I haven't done or forgotten to operate at 64-bit?

I am including the OR log below for investigation.

Thanks for your help and also for your work on OR_MG

Denis

Attached File(s)

•  OR_MG 64-bit issue.jpg (189.23K)
  Number of downloads: 2

[Csantucci]

Hi Denis,
looking at your crash window, I think you have a Windows 10 access rights problem. Try downloading and unzipping OR NewYear MG into another disk (not C), and remember to unzip using 7zip.

[Denis Gionet]

 Csantucci, on 02 October 2020 - 11:23 AM, said:

Hi Denis,
looking at your crash window, I think you have a Windows 10 access rights problem. Try downloading and unzipping OR NewYear MG into another disk (not C), and remember to unzip using 7zip.

Hi again Carlo,

Have uninstalled Open Rails on the main drive (C:). Made sure to have removed whatever referred to Open Rails on the Windows registry with regedit.exe. Once done, I have re-installed it on my another storage dvive (F:).

Unfortunately, after re-installing OR_MG, I get this message (see log)

Thanks

Denis

Attached File(s)

•  OR_MG 64-bit issue.jpg (182.78K)
  Number of downloads: 5

[PTrains87]

Hey Dennis, I've downloaded the latest version and is working fine for me.
It must be an extraction issue, you can easy fix it by using 7-zip, open the latest version downloaded with that software and extract the folder with it.
If you unzip by using the pre-build windows tools it will throw you such error. Let me know if the above will fix your issue.

I have a question for Csantucci, I notice that even in this new version of OpenRails the Timetable Editor tool is not included, there is any reason for this?

Thanks for your hardwork!

[Denis Gionet]

 PTrains87, on 02 October 2020 - 04:44 PM, said:

Hey Dennis, I've downloaded the latest version and is working fine for me.
It must be an extraction issue, you can easy fix it by using 7-zip, open the latest version downloaded with that software and extract the folder with it.
If you unzip by using the pre-build windows tools it will throw you such error. Let me know if the above will fix your issue.

Hi Ptrains87,

Gave it a shot with 7-zip as asked. Unfortunately it did not get resolved.

Thanks

Denis

[engmod]

Hi Denis,

The screenshot you last posted is not from ORMG.
Do you have your shortcuts mixed up?

Can you post the complete log next time please.

[Csantucci]

@Denis:
yes, attaching the full logfile is always a good idea. Try also verifying the Properties of the "Content" folder and of the "Content\loading.png" file to see if there is some attribute that denies you access.

@PTRains87: the timetable editor is not part of the OR source solution pack, and therefore cannot be generated together with the rest of OR. You can temporarily copy Contrib.TimetableEditor.exe from the OR Unstable or Testing version of OR into the OR_NewYear_MG folder. I will try to remember to do this for next OR NewYear MG revisions.

[Denis Gionet]

 engmod, on 02 October 2020 - 09:37 PM, said:

Hi Denis,

The screenshot you last posted is not from ORMG.
Do you have your shortcuts mixed up?

Can you post the complete log next time please.

Hi Derek,

I am running OpenRails64.exe file inside the OR_NewYear_MG folder. However, I cannot find the OpenRailslog.txt file as referred in the manual. Any help would be appreciated to create one.

Thanks

Denis