Air Brakes - Additional Features
#71
Posted 06 September 2016 - 05:30 AM
When using air single pipe with a max brake pipe pressure of 72.5 PSI. I set the full service brake pipe deduction to 22 PSI. So when the brake pipe pressure is at 50.5 PSI and the triple valve ratio is set at 2.5, my brake cylinder pressure should be 55 PSI but never rises above 52 PSI. 2.5 x 22 = 55. This also occurred in MSTS.
Am i missing something obvious?
Thanks
#72
Posted 06 September 2016 - 03:04 PM
#73
Posted 07 September 2016 - 08:52 PM
#74
Posted 11 September 2016 - 01:51 AM
#75
Posted 11 September 2016 - 09:18 AM
#76
Posted 12 September 2016 - 04:23 AM
#77
Posted 13 September 2016 - 10:43 PM
bane1349, on 11 September 2016 - 01:51 AM, said:
ATW, on 11 September 2016 - 09:18 AM, said:
I think that these two issues have been addressed in #3625.
#78
Posted 13 September 2016 - 11:55 PM
#79
Posted 14 September 2016 - 11:37 AM
Broken locomotive brake
EngineBrakesControllerFullServicePressureDrop ( 73 )
Open Rails
Psi/Bar
73/0
50/1,6
49/1,7
30/3
20/3,7
15/4
10/4,3
MSTS
Psi/Bar
50/3,4
49/3,3
30/2
20/1,3
15/1
10/0,6
Why it does not work in Open Rails as MSTS. Why does it need to enter those values differently.
#80
Posted 14 September 2016 - 06:08 PM