Operational turntable
#161
Posted 01 June 2016 - 08:51 AM
FYI, there are two working turntables in the ATSF Hereford route. The turntables.dat file is attached here as a .zip:
ATSF Hereford turntables.zip (333bytes)
Number of downloads: 590
(EDIT: the turntables are near Clovis and Amarillo).
Cheers,
ATSF Hereford turntables.zip (333bytes)
Number of downloads: 590
(EDIT: the turntables are near Clovis and Amarillo).
Cheers,
#162
Posted 01 June 2016 - 12:41 PM
This may have been mentioned, both LHRV routes [LHRV Ver4 (1968) & LHRV-1940] have turntables.
#163
Posted 03 June 2016 - 10:29 AM
I have set up the UK Black Country 1 route to gave operational turntables (there are seven a1t27mturntable.s).
I am getting the message "Rotation cannot start. Check throttle, speed, direction and control mode" when positioned centrally on the turntable with a steam loco and tender and using CTRL-C and ALT-C to turn it. Can anyone help?
I am getting the message "Rotation cannot start. Check throttle, speed, direction and control mode" when positioned centrally on the turntable with a steam loco and tender and using CTRL-C and ALT-C to turn it. Can anyone help?
#164
Posted 03 June 2016 - 10:56 AM
Successfully got the turntables in the Feather River route working using the provided info from midneguy :sign_thanks: it took me 2 days until i realised that i had to leave the top line empty in the turntables.dat file, once i did that all worked fine. great work to all concerned. :clapping:
#165
Posted 03 June 2016 - 12:10 PM
dforrest, on 03 June 2016 - 10:29 AM, said:
I have set up the UK Black Country 1 route to gave operational turntables (there are seven a1t27mturntable.s).
I am getting the message "Rotation cannot start. Check throttle, speed, direction and control mode" when positioned centrally on the turntable with a steam loco and tender and using CTRL-C and ALT-C to turn it. Can anyone help?
I am getting the message "Rotation cannot start. Check throttle, speed, direction and control mode" when positioned centrally on the turntable with a steam loco and tender and using CTRL-C and ALT-C to turn it. Can anyone help?
Reverser needs to be set to 0 or neutral.
#166
Posted 03 June 2016 - 12:22 PM
#167
Posted 03 June 2016 - 12:57 PM
You must be either in manual or explorer mode (no auto mode). Throttle must be at zero, speed at zero. Reverser at 0 (I'm not sure if -0 works).
#168
Posted 03 June 2016 - 02:02 PM
#169
Posted 04 June 2016 - 09:49 AM
I have really enjoyed this new addition to OR. I got the turntables in the USA-NJC route to work, but even after doubling the volume of the wav file I still can't hear any sound when operation the tables. Has anyone verified that the sound is working with the OR dat files??
#170
Posted 04 June 2016 - 09:58 AM
The sound does work on my system. Setup as described.