E.P Brake - No partial Release
#1
Posted 21 June 2015 - 04:01 AM
Although OR supports the EP brake, i cannot get the brake to partially release.
I have this in the brake type : brakesystemType( "EP" )
and this in the controller section : Notch ( 0.10 1 TrainBrakesControllerEPApplyStart )
The EP brake functions 100% in self lapping in applying, with air reduction from the main res pipe and with the brake pipe staying at its max setting.
According to the Extended HUD Brake page, the EP brake status remains in the lap position when moving the brake handle back for a partial release.
It appears partially release for the EP brake may have been left out!
Can someone please confirm this ?
Thanks
#2
Posted 21 June 2015 - 04:25 AM
#3
Posted 21 June 2015 - 07:13 AM
Thanks
#4
Posted 21 June 2015 - 07:51 AM
#5
Posted 21 June 2015 - 09:08 AM
copperpen, on 21 June 2015 - 07:51 AM, said:
Okay. I just need someone to confirm my readings using the EP brake, because this looks like a bug.
Thanks
#6
Posted 26 June 2015 - 01:00 AM
Thanks
#7
Posted 27 June 2015 - 03:56 PM
Coolhand101, on 26 June 2015 - 01:00 AM, said:
Thanks
I must be the only one using/testing the EP brake token?
Anyway, a member over at train-sim.com, has confirmed, that there is no graduated release when using EP as the
"BrakeSystemType" The graduated release option is ticked, under the "general" options page!
Thanks
#8
Posted 01 July 2015 - 05:18 AM
#9
Posted 01 July 2015 - 05:42 AM
What does not seem to be coded are the names of the notches used in an EP system. So one has to use normal air brake tokens in the controller.
#10
Posted 02 July 2015 - 06:32 AM
Thanks