Track gone missing but path still shows
#21
Posted 20 April 2020 - 06:10 AM
This will only affect the track piece directly connected to a switch (only one part of a multi-track or multi-section piece)
#22
Posted 20 April 2020 - 07:07 AM
#23
Posted 20 April 2020 - 07:14 AM
#24
Posted 20 April 2020 - 07:15 AM
Solution for it is easy, just double Z affected track.
#25
Posted 20 April 2020 - 07:25 AM
Goku, on 20 April 2020 - 07:15 AM, said:
Take a look at my diagram.
If, at stage 3, you connect the 'missing piece' (red track section) from the left-hand side, the problem does not occur.
But, if you connect the 'missing piece' from the right-hand side, so from the opposite direction as the first part of that track section was placed, the error occurs. By placing the 'missing piece' from the right-hand side, the direction of that whole section between the two switches changes around, and that is what is causing the problem. I don't quite see what can done wrong in just placing a track piece.
Quote
Yes, I know, but it means that whenever I have connected a track to a switch I must check the other end. And the problem is not clearly visible in TSRE as the yellow line remains in place. So, after an edit session, I always check the newly laid tracks and signals with the OR track viewer. It just shouldn't be necessary.
Regards,
Rob Roeterdink
#26
Posted 20 April 2020 - 07:44 AM
#27
Posted 20 April 2020 - 07:58 AM
roeter, on 20 April 2020 - 07:25 AM, said:
I tried it many times and it never caused me an error? Can you prepare a demo route with track layout causing this problem? .. before placing the last piece ofc.
Quote
No one reported it before, but indeed there may be a bug here.
#28
Posted 21 April 2020 - 08:21 AM
How do they appear. In what conditions does this happen and how to avoid?
https://i.imgur.com/vbdV3gv.jpg
#29
Posted 21 April 2020 - 08:42 AM
#30
Posted 25 April 2020 - 02:28 AM