[hroch]

Here are eng/wag.
 eng.zip (15.89K)
Number of downloads: 514
Presurre brake cylider of locomotive disappear from basic HUD always, when second number in notch is 1. For example Goldorf 380 or Dash.

Why don´t you use for brake controller 26L and 24LR notch
TrainBrakesControllerMinimalReductionStart as the MSTS? This notch will reduce pressure in brake pipe as set by TrainBrakesControllerMinPressureReduction ( x ). No work in OR.

24LR

             NumNotches ( 5
Release         Notch( 0.0  0 TrainBrakesControllerReleaseStart )
Running         Notch( 0.25 0 TrainBrakesControllerGraduatedSelfLapLimitedStart )
First Service   Notch( 0.30 0 TrainBrakesControllerMinimalReductionStart )
Lap             Notch( 0.50 0 TrainBrakesControllerSelfLapStart )
Service         Notch( 0.75 0 TrainBrakesControllerContinuousServiceStart )
Emergency       Notch( 1.00 0 TrainBrakesControllerEmergencyStart )
    )

[steamer_ctn]

hroch, on 19 August 2016 - 02:09 AM, said:

Here are eng/wag.

Thanks for that.

hroch, on 19 August 2016 - 02:09 AM, said:

Presurre brake cylider of locomotive disappear from basic HUD always, when second number in notch is 1. For example Goldorf 380 or Dash.

The BC pressure will only appear when the engine brakecontoller does not display a % value.

There was along discussion in this thread which covered some of the various thoughts offered by people.

hroch, on 19 August 2016 - 02:09 AM, said:

Why don´t you use for brake controller 26L and 24LR notch
TrainBrakesControllerMinimalReductionStart as the MSTS? This notch will reduce pressure in brake pipe as set by TrainBrakesControllerMinPressureReduction ( x ). No work in OR.

Seems a reasonable proposition. I will investigate it some more.

hroch, on 19 August 2016 - 02:09 AM, said:

24LR

     		NumNotches ( 5
Release 		Notch( 0.0  0 TrainBrakesControllerReleaseStart )
Running 		Notch( 0.25 0 TrainBrakesControllerGraduatedSelfLapLimitedStart )
First Service   Notch( 0.30 0 TrainBrakesControllerMinimalReductionStart )
Lap     		Notch( 0.50 0 TrainBrakesControllerSelfLapStart )
Service 		Notch( 0.75 0 TrainBrakesControllerContinuousServiceStart )
Emergency   	Notch( 1.00 0 TrainBrakesControllerEmergencyStart )
    )

Is this a working extract or a suggestion? It only has 5 notches defined, but 6 declared?

[Fablok]

I have hope that You will invent super brakes. Right now my steam locomotives are non driveble. Brakes gone mad. I wish You will create schematic for steam loco brakes :)

[steamer_ctn]

Fablok, on 19 August 2016 - 04:51 PM, said:

I have hope that You will invent super brakes. Right now my steam locomotives are non driveble. Brakes gone mad. I wish You will create schematic for steam loco brakes :)

Can you expand on your comments a bit?

"Brakes gone mad" does not provide any specific details apart from the fact that you are getting frustrated.

[hroch]

steamer_ctn, on 19 August 2016 - 01:55 PM, said:

The BC pressure will only appear when the engine brakecontoller does not display a % value.

It will be confusing to the player. I think a better solution is display the BC pressure of locomotives for all engine/train brake controller.

steamer_ctn, on 19 August 2016 - 01:55 PM, said:

Is this a working extract or a suggestion? It only has 5 notches defined, but 6 declared?

Only suggestion inspired by those pages. I'm sorry. I wrote it wrong. Correctly to be six.

[Fablok]

Ok I have use Westinghouse setting from Czech steamers. I have delete one noch ( quick realese) and now it's working fine.

Brake_Train ( 0 1 0.05 0.2
NumNotches ( 5

Notch ( 0.00 0 TrainBrakesControllerReleaseStart )
Notch ( 0.20 0 TrainBrakesControllerNeutralhandleOffStart )
Notch ( 0.30 1 TrainBrakesControllerApplyStart )
Notch ( 0.85 0 TrainBrakesControllerFullServiceStart )
Notch ( 1.00 0 TrainBrakesControllerEmergencyStart )
)
)

[steamer_ctn]

Fablok, on 23 August 2016 - 10:18 AM, said:

Ok I have use Westinghouse setting from Czech steamers. I have delete one noch ( quick realese) and now it's working fine.

Brake_Train ( 0 1 0.05 0.2
NumNotches ( 5

Notch ( 0.00 0 TrainBrakesControllerReleaseStart )
Notch ( 0.20 0 TrainBrakesControllerNeutralhandleOffStart )
Notch ( 0.30 1 TrainBrakesControllerApplyStart )
Notch ( 0.85 0 TrainBrakesControllerFullServiceStart )
Notch ( 1.00 0 TrainBrakesControllerEmergencyStart )
)
)

What brake control valve are you trying to emulate?

A6, A7, 24RL, or other (what type)?

[steamer_ctn]

hroch, on 19 August 2016 - 02:09 AM, said:

TrainBrakesControllerMinimalReductionStart as the MSTS? This notch will reduce pressure in brake pipe as set by TrainBrakesControllerMinPressureReduction ( x ). No work in OR.

This should start working in OR now (#3612).

[Fablok]

STeamer. In books there is only writen that polish steam engines have Westinghouse or Knorr brake system. No specyfic model. So I heve hope that You will help.

[Icik]

steamer_ctn, on 23 August 2016 - 11:01 PM, said:

This should start working in OR now (#3612).

Minimal reduction??? Why? It dosn´t in real life exist! In this position is just closure of brake pipe for test of leak.