Tim Muir's NP #1440 33ft Caboose Passenger View INOP in Open Rails
#1
Posted 28 June 2015 - 07:08 PM
see thread>>>> http://www.elvastowe...895#entry183895
#2
Posted 28 June 2015 - 09:49 PM
#3
Posted 29 June 2015 - 06:25 AM
timmuir, on 28 June 2015 - 09:49 PM, said:
Is there another car (or loco) in your train with a passenger view ahead of NP 1440? If there is, it (they) will be displayed first. Just cycle through (keep hitting the 5 key) until the caboose interior displays. It works on my machine (I tested two of the 7 different view wags):
Open Rails 2015-06-28 10-34-32.jpg
Open Rails 2015-06-28 10-47-50.jpg
That's a very homely looking interior, Tim. Especially that first shot you took. If one weren't to mention it's from inside a caboose, that shot would have me thinking it's from someone's house. :sign_thanks:
#4
Posted 29 June 2015 - 08:11 AM
Allen
#5
Posted 29 June 2015 - 08:16 AM
timmuir, on 28 June 2015 - 09:49 PM, said:
Is there another car (or loco) in your train with a passenger view ahead of NP 1440? If there is, it (they) will be displayed first. Just cycle through (keep hitting the 5 key) until the caboose interior displays. It works on my machine (I tested two of the 7 different view wags):
Yes, my test consist was with a BLW/ZT GP7, CR5603 and the (very fine!) caboose. The 5 view works for the engine but will not display the caboose. Also works with 5 BLW engines in a consist. 5 key cycles through all the engines as it should. Never had a problem with the passenger view cycling before.
I'm going to try some other wag files with a passenger view - put them in a consist with the caboose. Very possible I could have messed the file up...do not see how, but it's happened before.
Thanks for the reply and the excellent caboose, just outstanding, really! Will post later.
#6
Posted 30 June 2015 - 03:45 AM
R H Steele, on 29 June 2015 - 08:16 AM, said:
I'm going to try some other wag files with a passenger view - put them in a consist with the caboose. Very possible I could have messed the file up...do not see how, but it's happened before.
Thanks for the reply and the excellent caboose, just outstanding, really! Will post later.
I am getting similar results. I am getting internal views of the engines up front but not the caboose.
#7
Posted 30 June 2015 - 04:31 AM
Coupling (
comment (Rear Coupler )
Type ( Automatic )
Spring (
Stiffness ( 9.8e5N/m 1.76e6N/m )
Damping ( 1.77e6N/m/s 1.77e6N/m/s )
Break ( 2.45e7N 1.78e6N )
r0 ( 0cm 4cm )
)
( CouplingHasRigidConnection ( )
Velocity ( -0.1m/s )
)
Regards.
#8
Posted 30 June 2015 - 06:32 AM
Also, thanks Ed and Gerald for the compliments. It was fun going all out creating the "home on wheels". Now if only we can make it virtual, like the new 3D cab environments for locos...
Oh, please report whether or not this cures the problem...thanks.
Attached File(s)
-
NP_33ft_Caboose_1440_Alt_Views.zip (10.95K)
Number of downloads: 322
#9
Posted 30 June 2015 - 09:59 AM
By the way the interiors truly are beautiful.
#10
Posted 30 June 2015 - 10:06 AM
Perhaps you should replace the WAGs in the download with these new ones.