Once More: System.ArgumentOutOfRangeException x1836
#1
Posted 08 November 2013 - 11:45 AM
today was a really hard day so instead of trying to add a few lines to my paper for fraduation, I fired up OpR for the first time in 5 weeks.
Ran a self-written activity on Bob Wirth´s Freeware Gallup Sub route, taking me up to the Loops of the Defiance spur. Upon entering the Loop, I get a System.ArgumentOutOfRangeException. Tried reloading from diverse prevous saves, but nothing really changed to better results.
Log attached: OpenRailsLog08112013.txt (8.28K)
Number of downloads: 171
Anybody got an Idea what could cause this Troubles? Maybe afaulty activity file?
Yours, Markus
#2
Posted 08 November 2013 - 01:21 PM
#3
Posted 09 November 2013 - 03:41 AM
Anyway, ASAP, I´ll test in the new Version, and maybe some older one too. Thanks for the tip, however, that it´s not my .ACT file (had numerous Troubles with it befre...).
CHeers, Markus
#4
Posted 12 November 2013 - 12:26 PM
Is it about entering the Loop / balloon track at Defiance? Maybe from the wrong direction? Will also go and check this out, but I already have some time ago (the ACT has been bugging me for some time already) and checking it out will just be hope, I fear...
Yours, Markus
PS: Log
OpenRailsLog12112013.txt (9.31K)
Number of downloads: 165
#5
Posted 12 November 2013 - 02:52 PM
#6
Posted 13 November 2013 - 07:35 AM
Will post what I get, as soon as I get anything :rolleyes:
Cheers, Markus
#7
Posted 13 November 2013 - 12:55 PM
Since recently I checked the path in MSTS AE and accidentially deleted it, I had to redo it. In doing so I did not wholly set it up like it originally was, but so that the Train would have to run through a storage track at Defiance. In fact, however, it just kept going straight on through the main loading track, and upon crossing the Switch where it should have reentered this track, the program crashed. So, maybe, the Problem is about the path not being interpreted correctly by OpR, which leads to the Train running over a Switch not correctly aligned, causing the Crash.
Will alter the path to run through the main loading track now (it also didn´t do that before, and it seems OpR also didn´t parse this correctly) and try again in X1836. Then, MAYBE in the newest Version, depending on how much time I have avalable during the next days to invest in These (quite extensive) investigations.
CHeers, Markus
#8
Posted 14 November 2013 - 12:26 PM
roeter, on 08 November 2013 - 01:21 PM, said:
Looks like a problem in the new TCS code.
RE your above post, Rob, RE you post about the Loop Setup, Mervin and RE ma last post: It has nothing to do with the Loop Setup or how the activity is running through the Loop at Defiance.
As said above, I tried an .ACT Setup with the path straight in (over what one would think is the main track, the track running striaght through the mine loadout complex) to the Loop, and I had no Problems entering and running through the Loop.
On exiting the Loop, however, as Mervyn reported, it seems once again something is not Happening as it should be as the Switch of the Loop stays aligned like it was when entering the Loop, making for another Sys.ArgOUtOfRangeExc...
The first Sys.ArgOutOfRangeExc - which was the reason I started this thread - seems to be caused by either OpR not correctly reading the path file / not correctly doing what is specified in there (missaligning the Switches) or by MSTS AE not saving the path correctly. Taking into consideration, however, my previous experiences, and that in AE when I simulate the activity the Train takes the right path, it seems that the bug is with OpR. Resetting the TCS System to the previous state, before you changed anything does not seem to be the cause, since I also had Problem in x1836. Rather, this seems to be another bug.
For the second one it seems like only OpR can be the "one at fault", missinterpreting something from the Definition files...
Should I file a Bug Report?
CHeers, Markus
#9
Posted 15 November 2013 - 01:03 AM
Regards,
Rob Roeterdink
#10
Posted 15 November 2013 - 07:34 AM
Thanks for the help :huh:
galluplocal.pat.txt (25.23K)
Number of downloads: 148 (remove txt Extension before use)
CHeers, Markus