Operational turntable
#171
Posted 04 June 2016 - 10:11 AM
Thanks for your reply, I'll just keep working on it!
#172
Posted 04 June 2016 - 10:47 AM
midneguy, on 19 May 2016 - 03:12 AM, said:
First off, the sounds do work so congratulations on that! I just had to rename where appropriate for the Feather River route and they worked when the turntable was both empty and loaded.
midneguy, the rename you mentioned in the above quote, where is it and what should it be renamed to, i have the 2 sound files in the global sound folder, but cannot seem to find a sms file associated with them
#173
Posted 07 June 2016 - 05:23 AM
#174
Posted 07 June 2016 - 05:40 AM
I have put all required files to Sizili 1 and Global .
But if i start OpenRails I get following message (in German):
SystemNullReferenceException: Der Objektverweis wurde nicht auf eine Objektinstanz festgelegt. etc.
What may be the fault.
Regards Jazzotto
But if i start OpenRails I get following message (in German):
SystemNullReferenceException: Der Objektverweis wurde nicht auf eine Objektinstanz festgelegt. etc.
What may be the fault.
Regards Jazzotto
#175
Posted 07 June 2016 - 06:25 AM
You should attach here the whole OpenRailsLog.txt file you get on the desktop after the crash.
#177
Posted 07 June 2016 - 08:28 AM
There is some interesting discussion on the Train Sim Safe House forums on activity paths incorporation turntable use:
http://tsforum.freec...ting-turntables
http://tsforum.freec...ting-turntables
#178
Posted 07 June 2016 - 08:33 AM
jazzotto, I suppose you haven't edited the a1t27mturntable.s file as described in my post, or haven't edited it correctly.
More simply you can replace such file (that is within Train Simulator\Global\Shapes) with the one you find in the .zip file here http://www.elvastowe...post__p__202645 . Only use a1t27mturntable.s from such .zip file for route Sicilia 1!
More simply you can replace such file (that is within Train Simulator\Global\Shapes) with the one you find in the .zip file here http://www.elvastowe...post__p__202645 . Only use a1t27mturntable.s from such .zip file for route Sicilia 1!
#179
Posted 07 June 2016 - 08:41 AM
dforrest, on 07 June 2016 - 08:28 AM, said:
There is some interesting discussion on the Train Sim Safe House forums on activity paths incorporation turntable use:
http://tsforum.freec...ting-turntables
http://tsforum.freec...ting-turntables
Thanks David for the advertisement you do there :)
I am a bit concerned about what Stephen writes:
"I am able to use any road into the Roundhouse but when I come back again and try to turn the turntable the loco flies sideways off the turntable, presumably because the loco is off its original path. This happens in both Activity and Explore Modes."
This should not happen and I wonder how he could have it happen. Could you check with TrackViewer if the turntable is at a tile's boundary, if you have the route?
#180
Posted 07 June 2016 - 09:04 AM
Thanks Csanducci for the quick answer!
All is working fine!
Jazzotto
All is working fine!
Jazzotto