New Route Editor for Open Rails Build routes without msts
#1141
Posted 05 November 2016 - 08:41 PM
#1142
Posted 06 November 2016 - 06:29 AM
Rohit R Krishnan, on 05 November 2016 - 08:35 PM, said:
Yes. You choose the shape you want and you select the track you want auto placement.
#1143
Posted 06 November 2016 - 07:48 AM
#1144
Posted 06 November 2016 - 08:18 PM
- auto placement (more info later)
- Q key functions changed: http://koniec.org/ts...recontrols.html
#1145
Posted 08 November 2016 - 02:05 AM
#1146
Posted 10 November 2016 - 07:14 AM
In french first. In English following
J'utilise la version 0.650 et je rencontre beaucoup de problèmes que je ne rencontrais pas auparavant.
1. INSERTION DANS LE FICHIER.TDB
Avant, on plaçait le rail et lorsque c'était OK. Touche 'Z' et touche 'F'. C'était bien.
Maintenant; si on clique une deuxième fois sur le rail (parce qu'on a perdu la sélection p.ex) le fil jaune de présence dans .tdb apparait. On est obligé de re selectionner, appuyer sur la touche 'Z' et recommençer le positionnement.
2. POSITIONNER UN RAIL AU DESSUS DU VIDE
J'avais déja posé la question parce que TSRE5 ne voulait pas ajouter un rail à celui qui n'etait pas couché sur le terrain.Post: Posted 31 October 2016 - 06:56 AM . Votre réponse était touche 'Q' Posted 31 October 2016 - 07:08 AM . Ca ne marche pas. La touche 'Q' est inopérante.
3. TROU PRFOND DANS LE TERRAIN
Lorsque l'on veut adapter le terrain à un rail très petit ( A1t0m22, A1t0m33, A1t0m44, A1t0m88, A1t1m, etc...) La touche 'F' occasionne un trou très profond dans le terrain.
4. POSITIONNEMENT et DIRECTION D UN RAIL
Lorsque l'on incrémente l'élévation d'un rail avec TSRE5, on ne retrouve pas l'élévation dans MSTS ou elle est indiquée à zero.
--------------------------------------------------------------------------------------------------------------------------------
I use the 0650 release and I encounter some problems that I did not encounter before.
1. INSERT INTO FICHIER.TDB
Some releases ago, we put the track and when it was OK. Key 'Z' and 'F' key. It was good.
Now; if you click a second time on the track (because we lost the selection eg) the yellow wire of presence in .tdb appears. We are forced to re select, press 'Z' and restart positioning.
2. POSITIONING TRACK ABOVE A RAVIN eg
I had asked the question because TSRE5 did not want to add a track to that which was not lying on the terrain.Messaget: Posted 31 October 2016 - 6:56 AM. Your answer was 'Q' key Message: Posted 31 October 2016 - 7:08 AM. But I did not succed! It does not work. The 'Q' key does not work.
3. VERY DEEP HOLE IN THE GROUND
When I want to adapt the ground to the track, I select it and press key 'F'. But without attention, I I select a very small rail (A1t0m22, A1t0m33, A1t0m44, A1t0m88, A1t1m, etc ...) The 'F' key causes a very deep hole in the ground.
4. POSITIONING RAIL and DIRECTION
When increments the elevation of a rail with TSRE5, is not found in the elevation MSTS or it is indicated to zero. (!)
Can you help me? Thank you.
#1147
Posted 10 November 2016 - 08:59 AM
StationWhere, on 10 November 2016 - 07:14 AM, said:
2. POSITIONING TRACK ABOVE A RAVIN
Read release notes !
Quote
Q - place new.
Ctrl + Q - toggle manual/auto add track to TDB (use Z key for manual).
Shift + Q - change placement mode: stick only to terrain / stick to everything.
StationWhere, on 10 November 2016 - 07:14 AM, said:
Will fix it in the future.
StationWhere, on 10 November 2016 - 07:14 AM, said:
MSTS shows angle value, TSRE shows values used in real world track building.
#1148
Posted 10 November 2016 - 11:45 AM
Goku, many thanks for this impressive program !
Several user on the fench-speaking activitysimulator forum, however, encountered the following problem : we cannot downloading some maps ; this problem occurs especially in the center of Paris :
- the map appears correctly on tiles located near the city limits (example : -6026 14790, where the RER C "Boulainvilliers" (48.856452, 2.275125) and "Kennedy" (48.853325, 2.279996) stations are located ;
- but so far we were unable to load maps in the center of the city (example : -6026 14791, near "Tour Eiffel" station (48.855167, 2.289105), on the same line) ; if we try this, TSRE does not respond and we have to shut down the program.
Here's the end of a log file when trying (without success) to load the map on the tile -6025 14791 :
Quote
[I] lat 48.8777 48.8582
[I] lon 2.29455 2.32788
[I] lat 48.8582 48.8777
[I] lon 2.30132 2.32112
[I] wait
[I] data 0
Looks like no data is available on the server...
#1149
Posted 10 November 2016 - 12:14 PM
#1150
Posted 10 November 2016 - 02:00 PM
Sorry I read this thread but I could not find any hints for this error. The problem is the dynamic track.
Test Construction: strt Track - dynamic Track - strt Track on a new route.
On both connection points follow the track some invisible circle before it goes ahead normally.
TrackDB and Tsection lines shows right.
Is this a TSRE or OR bug?
Edit:
I replaced a dynamic Track on Marias Pass 5 with the same problem and the Trackviewer chrash after the replace.
Attached File(s)
-
DynTrack.jpg (138.24K)
Number of downloads: 10 -
Open Rails 2016-11-10 11-36-45.jpg (90.36K)
Number of downloads: 4