Still on turntable?
#1
Posted 23 September 2023 - 08:41 AM
It is still displayed turntable (German: Drehscheibe - see red arrows) in the trackmonitor despite the loco was running to another track some time after leaving the turntable. Also there are no signals or milestones etc. displayed in the track monitor. It seems that OR handles the loco like it would be still on the turntable. Also no Speeds are displayed - see this screenshot:
Possibly not an only ORNYMG bug.
Greetings
Jonas
OpenRailsLog.zip (4.53K)
Number of downloads: 59
#2
Posted 23 September 2023 - 11:23 AM
1) Does this occur to you constantly when exiting the turntable to that track?
2) Does this occur to you also exiting the turntable to other tracks?
3) Does this occur to you also in other routes?
I notice in the logfile a good amount of warnings related to the .tdb file: they might create malfunctions.
#3
Posted 23 September 2023 - 02:45 PM
thanks for your quick response, good to hear from you!
I have investigated it further and found that it indeed only affects the ORNYMG version (testet with ORNYMG Rev. 146).
The current OR test version U2023.09.23-0922 does not have the problem.
Csantucci, on 23 September 2023 - 11:23 AM, said:
Csantucci, on 23 September 2023 - 11:23 AM, said:
Csantucci, on 23 September 2023 - 11:23 AM, said:
Csantucci, on 23 September 2023 - 11:23 AM, said:
I guess you mean the many lines like this:
"Warning: Cannot parse the constant number 0.1 in D:\Spiele\MSTS\ROUTES\BStE_Hauptversion\BStE.tdb:line 121276"
"Warning: Cannot parse the constant number 0.01 in D:\Spiele\MSTS\ROUTES\BStE_Hauptversion\BStE.tdb:line 123178"
The numbers 0.1 or 0.01 are always - again and again - generated by the MSRE when saving the route and should be tolerated by OR instead of being displayed as a warning.
I have known these warnings in the OpenRailsLog.txt for years and consider it as an intolerance to the MSRE. Thats why I think it has nothing to do with the above problem.
One minor thing - in the OpenRailsLog it says "Version = ORNYMG-Rev. 140.5." although I am using the 146.
Greetings
Jonas
#4
Posted 23 September 2023 - 05:50 PM
#5
Posted 24 September 2023 - 12:28 AM
#6
Posted 24 September 2023 - 01:42 AM
Here is my current log file:
OpenRailsLog.zip (4.09K)
Number of downloads: 58
But the actual problem with the turntable remains for me here.
#7
Posted 24 September 2023 - 05:36 AM
#8
Posted 24 September 2023 - 09:10 AM
Moving the engine onto the turntable neither on screen or IP heads up displays show "turntable" until you start to rotate the turntable.
https://i.imgur.com/zhpSCPch.jpg
https://i.imgur.com/Rgu7LUkh.jpg
Once you start rotating the turntable both do.
https://i.imgur.com/tGyIslPh.jpg
https://i.imgur.com/OJos4YFh.jpg
When either end of the turntable track line up with a lead track the IP display shows normal track and the onscreen displays "turntable".
https://i.imgur.com/N6faRjTh.jpg
https://i.imgur.com/tGyIslPh.jpg
And the onscreen display doesn't ever clear
https://i.imgur.com/F8r1CxAh.jpg
Randy
#9
Posted 24 September 2023 - 09:16 AM
Highly-artistic test report!
#10
Posted 24 September 2023 - 09:45 AM
I wanted to show what was happening in game.
Randy