Diesel Locomotives with Two Engines
#1
Posted 26 April 2020 - 09:21 AM
I have found the same issue using a different version of OR and a different locomotive.
This is what we have both observed:
Shut down No 1 engine using Shift+Y - no sound and no exhaust from either engine
Restart No 1 engine and shut down No 2 engine using Ctrl+Y - sound and also exhaust from both engines
Possibly someone more knowledgeable can confirm if there is indeed a problem.
#2
Posted 26 April 2020 - 10:39 AM
Quote
The keyboard keys to switch on and o diesel engines are following ones:
• Ctrl+Y switches on and off the first diesel engine of the player locomotive
• Shift+Y switches on and off the other diesel engines of the player locomotive, plus all diesel engines
of the further locomotives in the train, if they are MUed, (that is under control of the player
locomotive) which is the default.
Following cabview controls are available:
ORTS_PLAYER_DIESEL_ENGINE: the first frame is displayed when the diesel engine of the player locomotive
is in states stopped or stopping, while the second frame is displayed when it is in states running
or started. The control may be used with the mouse and starts/stops the (rst) diesel engine of the player
locomotive, and is useful when a single two state lever is used to start/stop the engine....etc
#5
Posted 26 April 2020 - 09:55 PM
#6
Posted 26 April 2020 - 10:16 PM
darwins, on 26 April 2020 - 09:55 PM, said:
Firstly I suspect that there are not many locomotives with multiple prime movers, and secondly most people probably don't turn the prime movers on and off.
The only time that it may cause operational problems is when using multiple locomotives, if the leading loco is a multiple, and the driver turns the trailing unit off to conserve fuel (which I understand is a modern practice) the they will also turn the trailing unit off as well as one of the prime movers in the leading unit.
#7
Posted 27 April 2020 - 03:54 AM
steamer_ctn, on 26 April 2020 - 10:16 PM, said:
/// • Shift + Y switches on and off the other diesel engines of the player locomotive, plus all diesel engines
Just to be sure, as mentioned at the beginning, I think there is a writing error in the Manual?
My experience is that Shift-Y starts / stops the player locomotive and Ctr-Y the other diesels (and second diesel engine if it exists) Or am I missing something with this topic?
#8
Posted 27 April 2020 - 06:21 AM
QJ-6811, on 27 April 2020 - 03:54 AM, said:
My experience is that Shift-Y starts / stops the player locomotive and Ctr-Y the other diesels (and second diesel engine if it exists) Or am I missing something with this topic?
See my post#2 or Sec 14.1.1 in the manual. I had not realized other cab controls were available until spotting this thread.
#9
Posted 27 April 2020 - 07:16 AM
QJ-6811, on 27 April 2020 - 03:54 AM, said:
My experience is that Shift-Y starts / stops the player locomotive and Ctr-Y the other diesels (and second diesel engine if it exists) Or am I missing something with this topic?
Yes, there is definitely an error in the manual. The two commands must be exchanged in the manual.
#10
Posted 27 April 2020 - 11:03 AM