I am the author of this route. The problem is that all the trackwork and signalling was placed before TSRE5 became available and therefore any errors were introduced by the MSTS RE and over which therefore I had no control. Indeed, it was not until OR became available that I became aware of the problems with the sigalling and crossovers flagged by OR. David, who is helping me get the route ready for distribution, is simply asking for advice on how to tackle these issues. I appreciate Rick's understanding of the problems for route builders using RE and would accept his suggestion to switch to TSRE5 were it not for the fact that I find, on my system at least, movement within TSRE5 is too jerky for it to be easily useable and this despite having posted on this topic and received advice re settings.
How to Demystify Open Rails Log Files?
#22
Posted 31 January 2020 - 07:51 AM
Doc,
Try these settings in TSRE.
mouseSpeed = 0.1
cameraspeedMax = 20
cameraSpeedMin = 2
cameraSpeedStd = .2
It will slow down the mouse movement to a more reasonable speed.
Camera speed is more manageable.
Arrow/w + ctrl speeds it up a little, arrow/w + shift speeds it up a lot.
Steve
Try these settings in TSRE.
mouseSpeed = 0.1
cameraspeedMax = 20
cameraSpeedMin = 2
cameraSpeedStd = .2
It will slow down the mouse movement to a more reasonable speed.
Camera speed is more manageable.
Arrow/w + ctrl speeds it up a little, arrow/w + shift speeds it up a lot.
Steve
#23
Posted 31 January 2020 - 09:59 AM
Thanks for your suggestions re settings, Steve. Do I need to place # before the entries?
Martiin
Martiin
#24
Posted 31 January 2020 - 11:15 AM