Looking really nice, but that headlight needs to be a tapered back model rather than a can. Look closely at the prototype shot. Great model work.
Found a shot of a proper headlight on his model:
SP MT-1 Progress a rebuild of an old classic
#13
Posted 12 August 2018 - 10:08 AM
Pretty much done with the Locomotive, now got to get the tender built for it.
https://cdn.discordapp.com/attachments/416343150425276436/478262944623362088/SP_MT-4.jpg
https://cdn.discordapp.com/attachments/416343150425276436/478262944623362088/SP_MT-4.jpg
#14
Posted 12 August 2018 - 08:52 PM
Started building the 160-C2 Tender for the MT-1.
https://cdn.discordapp.com/attachments/416343150425276436/478425058574991360/SP_160-C2_Tender.jpg
https://cdn.discordapp.com/attachments/416343150425276436/478425058574991360/SP_160-C2_Tender.jpg
#15
Posted 13 August 2018 - 10:02 AM
Almost finished the tender already.
https://cdn.discordapp.com/attachments/416343150425276436/478623650510274583/SP_160-C2_Tender.jpg
https://cdn.discordapp.com/attachments/416343150425276436/478623650510274583/SP_160-C2_Tender.jpg
#16
Posted 14 August 2018 - 12:43 AM
If you don't mind me asking, what's the poly count on these babies?
http://www.elvastower.com/forums/public/style_emoticons/default/oldstry.gif
http://www.elvastower.com/forums/public/style_emoticons/default/oldstry.gif
#17
Posted 14 August 2018 - 06:42 AM
Almost done with the tender now, textures and all. The poly count of the locomotive is only 58176(including all wheels and rods)
https://cdn.discordapp.com/attachments/416343150425276436/478934730067410944/SP_160-C2_Tender.jpg
Locomotive, Pilot Truck.
https://cdn.discordapp.com/attachments/416343150425276436/478934724535123988/Pilot_Truck.jpg
https://cdn.discordapp.com/attachments/416343150425276436/478934730067410944/SP_160-C2_Tender.jpg
Locomotive, Pilot Truck.
https://cdn.discordapp.com/attachments/416343150425276436/478934724535123988/Pilot_Truck.jpg
#18
Posted 14 August 2018 - 04:28 PM
Fantastic modeling!
My only suggestion (if I may) might be to split the edges on the driving wheel hubs so that the flat face doesn't appear rounded. That's a minor quibble though. Can't wait to see more!
My only suggestion (if I may) might be to split the edges on the driving wheel hubs so that the flat face doesn't appear rounded. That's a minor quibble though. Can't wait to see more!
#19
Posted 15 August 2018 - 08:23 PM
Here's some more work on my model.
https://cdn.discordapp.com/attachments/416343150425276436/479502208711393290/SP_160-C2_Tender.jpg
The Trailing Truck has been dirtied up.
https://cdn.discordapp.com/attachments/416343150425276436/479502212041670677/Trailing_Truck.jpg
https://cdn.discordapp.com/attachments/416343150425276436/479502208711393290/SP_160-C2_Tender.jpg
The Trailing Truck has been dirtied up.
https://cdn.discordapp.com/attachments/416343150425276436/479502212041670677/Trailing_Truck.jpg
#20
Posted 23 August 2018 - 09:00 PM
Unbelievable. I've seen you around the forums for a while, but I had no idea you were this skilled of a modeler. I know this is for Railworks, but you think this thing can run in OR?