http://www.elvastowe...eenshot&id=1967
File Name: MSTS/OR Hoppers for eastern Bitumnious coal mining roads c,1926-1982
File Submitter: conductorchris
File Submitted: 30 Dec 2014
File Updated: 10 Apr 2015
File Category: Hoppers Std Gauge
UPDATE MARCH 9 2015 - .wag file corrections
This set covers railroads of the east that mined bituminous steam coal used in power plants and factories.
While most coal dealers received anthracite coal (from railroads serving Pennsylvania), some dealers also carried bituminous coal for industries that used smaller quantities.
Appropriate for a range of dates from 1926 to 1982. Some cars have ACI labels which appeared after 1967.
Models by Scott Brunner, Dick Cowen and Paul Charland.
Some photo-skins from photos (c.1972) by Chuck Bohi. Others have lettering only derived from photos from a variety of sources.
Three of these cars represent rebuilds using protruding panels to increase capacity, a modification popular in the 1930's, but later found to be vulnerable to rust damage. Others are offset designs and rib sided.
If you want a more detailed assortment of hoppers, I commend to you the BLWZT 1950's freight pack (part of the PRR4 set).
It contains hoppers from assortment of railroads and many
PRR hoppers, which were all over the east on connecting railroads. All circa 1947.
It's available at http://www.valleypas.../Sales/PRR4.htm
Click here to download this file
Page 1 of 1
MSTS/OR Hoppers for eastern Bitumnious coal mining roads c,1926-1982
#2
Posted 17 February 2015 - 02:57 PM
Startup Errors by ConBuilder. Apparently a lot of the Wag files haave an entry on the Wagon line that is different than the filename.
The wagon file CRR_HM_USR--LD.wag contains an error on the line Wagon ( CRR_HM_USRA-LD
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( CRR_HM_USR--LD
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hopper Bituminous USRA c.1926-1976
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file PLE_HM_USRA-LD..wag contains an error on the line Wagon ( PLE_HM_USRA-LD
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( PLE_HM_USRA-LD.
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hopper Bituminous USRA c.1926-1976
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HT_528042_MT.wag contains an error on the line Wagon ( CP_358293
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HT_528042_MT
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers B&O NKP offset 3bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HT_528042-coal.wag contains an error on the line Wagon ( CP_357526
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HT_528042-coal
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers B&O NKP offset 3bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file NKP_HT_79908_MT.wag contains an error on the line Wagon ( NKP_HT_79908__MT
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( NKP_HT_79908_MT
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers B&O NKP offset 3bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_234577_MT.wag contains an error on the line Wagon ( LV_HM_25587_MT
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_234577_MT
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_234577-coal.wag contains an error on the line Wagon ( LV_HM_25587-coal
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_234577-coal
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_234577-gravel.wag contains an error on the line Wagon ( LV_HM_25587-gravel
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_234577-gravel
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_234577-limestone.wag contains an error on the line Wagon ( LV_HM_25587-limestone
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_234577-limestone
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_234690_MT.wag contains an error on the line Wagon ( RDG_HM_63539_MT
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_234690_MT
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_234690-coal.wag contains an error on the line Wagon ( RDG_HM_63539-coal
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_234690-coal
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_234690-gravel.wag contains an error on the line Wagon ( RDG_HM_63539-gravel
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_234690-gravel
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_234690-limestone.wag contains an error on the line Wagon ( RDG_HM_63539-limestone
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_234690-limestone
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_235757_MT.wag contains an error on the line Wagon ( L&N-2B-Hop-01-e
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_235757_MT
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_235757-coal.wag contains an error on the line Wagon ( L&N-2B-Hop-01-c
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_235757-coal
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_235757-gravel.wag contains an error on the line Wagon ( L&N-2B-Hop-01-c
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_235757-gravel
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_235757-limestone.wag contains an error on the line Wagon ( L&N-2B-Hop-01-c
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_235757-limestone
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file C&O_HM_300142_MT.wag contains an error on the line Wagon ( L&N-2B-Hop-01-e
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( C&O_HM_300142_MT
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file C&O_HM_300142-coal.wag contains an error on the line Wagon ( L&N-2B-Hop-01-c
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( C&O_HM_300142-coal
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file C&O_HM_300142-gravel.wag contains an error on the line Wagon ( L&N-2B-Hop-01-c
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( C&O_HM_300142-gravel
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file C&O_HM_300142-limestone.wag contains an error on the line Wagon ( L&N-2B-Hop-01-c
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( C&O_HM_300142-limestone
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape li
The wagon file CRR_HM_USR--LD.wag contains an error on the line Wagon ( CRR_HM_USRA-LD
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( CRR_HM_USR--LD
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hopper Bituminous USRA c.1926-1976
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file PLE_HM_USRA-LD..wag contains an error on the line Wagon ( PLE_HM_USRA-LD
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( PLE_HM_USRA-LD.
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hopper Bituminous USRA c.1926-1976
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HT_528042_MT.wag contains an error on the line Wagon ( CP_358293
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HT_528042_MT
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers B&O NKP offset 3bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HT_528042-coal.wag contains an error on the line Wagon ( CP_357526
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HT_528042-coal
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers B&O NKP offset 3bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file NKP_HT_79908_MT.wag contains an error on the line Wagon ( NKP_HT_79908__MT
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( NKP_HT_79908_MT
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers B&O NKP offset 3bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_234577_MT.wag contains an error on the line Wagon ( LV_HM_25587_MT
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_234577_MT
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_234577-coal.wag contains an error on the line Wagon ( LV_HM_25587-coal
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_234577-coal
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_234577-gravel.wag contains an error on the line Wagon ( LV_HM_25587-gravel
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_234577-gravel
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_234577-limestone.wag contains an error on the line Wagon ( LV_HM_25587-limestone
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_234577-limestone
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_234690_MT.wag contains an error on the line Wagon ( RDG_HM_63539_MT
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_234690_MT
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_234690-coal.wag contains an error on the line Wagon ( RDG_HM_63539-coal
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_234690-coal
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_234690-gravel.wag contains an error on the line Wagon ( RDG_HM_63539-gravel
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_234690-gravel
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_234690-limestone.wag contains an error on the line Wagon ( RDG_HM_63539-limestone
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_234690-limestone
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_235757_MT.wag contains an error on the line Wagon ( L&N-2B-Hop-01-e
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_235757_MT
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_235757-coal.wag contains an error on the line Wagon ( L&N-2B-Hop-01-c
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_235757-coal
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_235757-gravel.wag contains an error on the line Wagon ( L&N-2B-Hop-01-c
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_235757-gravel
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file B&O_HM_235757-limestone.wag contains an error on the line Wagon ( L&N-2B-Hop-01-c
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( B&O_HM_235757-limestone
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file C&O_HM_300142_MT.wag contains an error on the line Wagon ( L&N-2B-Hop-01-e
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( C&O_HM_300142_MT
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file C&O_HM_300142-coal.wag contains an error on the line Wagon ( L&N-2B-Hop-01-c
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( C&O_HM_300142-coal
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file C&O_HM_300142-gravel.wag contains an error on the line Wagon ( L&N-2B-Hop-01-c
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( C&O_HM_300142-gravel
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape line
correct this error and re-run ConBuilder!!
The wagon file C&O_HM_300142-limestone.wag contains an error on the line Wagon ( L&N-2B-Hop-01-c
and so it couldn't be added to the wagons list.
Most probably the Wagon line is not the SAME as its FILENAME.
The Wagon line should be Wagon ( C&O_HM_300142-limestone
Folder A:\MSTS-Test\TRAINS\TRAINSET\Hoppers Bituminous 2bay c.1972
Or there is a syntax error on the wagonshape li
#3
Posted 17 February 2015 - 02:59 PM
Shape file Error found by ConBuilder
[Wagon SHAPE FILE]
The shape file B&O_HM_USRA_320835.s specified by the file B&O_HM_USRA_320835-MT.WAG
In the folder A:\MSTS-TEST\TRAINS\TRAINSET\HOPPER BITUMINOUS USRA C.1926-1976\
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( B&O_HM_USRA_320835.s )
--------------------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file B&O_HM_USRA_320835.sd belonging to the file B&O_HM_USRA_320835-MT.WAG
in the folder A:\MSTS-TEST\TRAINS\TRAINSET\HOPPER BITUMINOUS USRA C.1926-1976\
is bad or missing.
--------------------------------------------------
[Wagon SHAPE FILE]
The shape file NKP_HT_79908.s specified by the file NKP_HT_79908-COAL.WAG
In the folder A:\MSTS-TEST\TRAINS\TRAINSET\HOPPERS B&O NKP OFFSET 3BAY C.1972\
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( NKP_HT_79908.s )
--------------------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file NKP_HT_79908.sd belonging to the file NKP_HT_79908-COAL.WAG
in the folder A:\MSTS-TEST\TRAINS\TRAINSET\HOPPERS B&O NKP OFFSET 3BAY C.1972\
is bad or missing.
--------------------------------------------------
[SHAPE FILE ERROR]
The shape definition file WAB_HM_USRA-MT.sd located in the folder
A:\MSTS-TEST\TRAINS\TRAINSET\HOPPER BITUMINOUS USRA C.1926-1976\
is pointing to a file named WrxNP3hop55-MT.s that doesn't seem to exist or has a wrong name, in the folder
A:\MSTS-TEST\TRAINS\TRAINSET\HOPPER BITUMINOUS USRA C.1926-1976\Check that the shape filename is correct.
The error was found on this line: shape ( WrxNP3hop55-MT.s
This error will appear once for each eng/wag it is used in.
--------------------------------------------------
[SHAPE FILE ERROR]
The shape definition file WAB_HM_USRA-LD.sd located in the folder
A:\MSTS-TEST\TRAINS\TRAINSET\HOPPER BITUMINOUS USRA C.1926-1976\
is pointing to a file named WrxNP3hop55-LD.s that doesn't seem to exist or has a wrong name, in the folder
A:\MSTS-TEST\TRAINS\TRAINSET\HOPPER BITUMINOUS USRA C.1926-1976\Check that the shape filename is correct.
The error was found on this line: shape ( WrxNP3hop55-LD.s
This error will appear once for each eng/wag it is used in.
--------------------------------------------------
[Wagon SHAPE FILE]
The shape file B&O_HM_USRA_320835.s specified by the file B&O_HM_USRA_320835-MT.WAG
In the folder A:\MSTS-TEST\TRAINS\TRAINSET\HOPPER BITUMINOUS USRA C.1926-1976\
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( B&O_HM_USRA_320835.s )
--------------------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file B&O_HM_USRA_320835.sd belonging to the file B&O_HM_USRA_320835-MT.WAG
in the folder A:\MSTS-TEST\TRAINS\TRAINSET\HOPPER BITUMINOUS USRA C.1926-1976\
is bad or missing.
--------------------------------------------------
[Wagon SHAPE FILE]
The shape file NKP_HT_79908.s specified by the file NKP_HT_79908-COAL.WAG
In the folder A:\MSTS-TEST\TRAINS\TRAINSET\HOPPERS B&O NKP OFFSET 3BAY C.1972\
is missing or has a mistake in the name.
The error was found on this line: WagonShape ( NKP_HT_79908.s )
--------------------------------------------------
[SHAPE DEFINITION FILE ERROR]
The shape definition file NKP_HT_79908.sd belonging to the file NKP_HT_79908-COAL.WAG
in the folder A:\MSTS-TEST\TRAINS\TRAINSET\HOPPERS B&O NKP OFFSET 3BAY C.1972\
is bad or missing.
--------------------------------------------------
[SHAPE FILE ERROR]
The shape definition file WAB_HM_USRA-MT.sd located in the folder
A:\MSTS-TEST\TRAINS\TRAINSET\HOPPER BITUMINOUS USRA C.1926-1976\
is pointing to a file named WrxNP3hop55-MT.s that doesn't seem to exist or has a wrong name, in the folder
A:\MSTS-TEST\TRAINS\TRAINSET\HOPPER BITUMINOUS USRA C.1926-1976\Check that the shape filename is correct.
The error was found on this line: shape ( WrxNP3hop55-MT.s
This error will appear once for each eng/wag it is used in.
--------------------------------------------------
[SHAPE FILE ERROR]
The shape definition file WAB_HM_USRA-LD.sd located in the folder
A:\MSTS-TEST\TRAINS\TRAINSET\HOPPER BITUMINOUS USRA C.1926-1976\
is pointing to a file named WrxNP3hop55-LD.s that doesn't seem to exist or has a wrong name, in the folder
A:\MSTS-TEST\TRAINS\TRAINSET\HOPPER BITUMINOUS USRA C.1926-1976\Check that the shape filename is correct.
The error was found on this line: shape ( WrxNP3hop55-LD.s
This error will appear once for each eng/wag it is used in.
--------------------------------------------------
Page 1 of 1