Consists not loading in OR
#1
Posted 29 December 2014 - 08:17 PM
Hi all,
I have had a problem ever since I installed OR where none of my MSTS created consists load. I've tried reinstalling and updating with no success. Any ideas?
I have had a problem ever since I installed OR where none of my MSTS created consists load. I've tried reinstalling and updating with no success. Any ideas?
#2
Posted 29 December 2014 - 09:16 PM
What exactly happens in OR?
If the main consist is missing there will be an error message.
If the main consist is missing there will be an error message.
#3
Posted 29 December 2014 - 10:26 PM
#4
Posted 30 December 2014 - 09:14 AM
Do you have a locomotive selected for explore mode, or do you have <Any Locomotive> in the selection pane?
Cheers, Markus
Cheers, Markus
#5
Posted 30 December 2014 - 11:04 AM
#6
Posted 30 December 2014 - 01:47 PM
I believe this is the same problem as discussed at http://www.trainsim....motives-show-up which is still pending some form of answer from the OP there.
#7
Posted 30 December 2014 - 01:47 PM
That´s not the answer to my question.
The problem is, if you have a specific loco selected in the loco selection pane, you will only be able to select consists with that loco on the point. Or the other way round: If you want a consist with a specific loco on the point, select the loco first.
Cheers, Markus
The problem is, if you have a specific loco selected in the loco selection pane, you will only be able to select consists with that loco on the point. Or the other way round: If you want a consist with a specific loco on the point, select the loco first.
Cheers, Markus
#8
Posted 30 December 2014 - 02:23 PM
markus_GE, on 30 December 2014 - 01:47 PM, said:
That´s not the answer to my question.
The problem is, if you have a specific loco selected in the loco selection pane, you will only be able to select consists with that loco on the point. Or the other way round: If you want a consist with a specific loco on the point, select the loco first.
Cheers, Markus
The problem is, if you have a specific loco selected in the loco selection pane, you will only be able to select consists with that loco on the point. Or the other way round: If you want a consist with a specific loco on the point, select the loco first.
Cheers, Markus
I understand that. What I am trying to say is that I have locomotives and consists that were created using the MSTS activity editor are not appearing in my OR menu.
#9
Posted 30 December 2014 - 02:27 PM
OK, so it´s nothing to do with overlooking that difference to how MSTS does it...
@ Mervyn: Yep, looks to be the same. No clue hwever, yet...
Cheers, Markus
@ Mervyn: Yep, looks to be the same. No clue hwever, yet...
Cheers, Markus