[That Genset Foamer]

http://www.elvastowe...eenshot&id=1952
File Name: Cuesta Grade V2.0 (Part E)
File Submitter: That Genset Foamer
File Submitted: 07 Nov 2014
File Updated: 08 Nov 2014
File Category: Routes

Union Pacific's Coast Subdivision, between San Luis Obispo and Santa Margarita, CA. Modeled in present day, but suitable for any era give or take some details.
You must download all 5 parts and the most recent build of Scalerail and Scaleroad from 3dtrains.com for this route to work and several equipment packs for the demo activity.

Other needed Parts:
Part A
Part B
Part C
Part D

Specifications:
Length: 17 track-miles
Controlled Sidings: 4
Signaling: CTC, Weak Routing.
Signal types: Searchlights, Stacked Colorlights
Tunnels: 5
Longest: 1 mile
Topographical: 5
Mitigation / Grade Separation: 0
Bridges: 6
Longest: 280 meters
Topographical: 2
Mitigation / Grade Separation: 3
Grade Crossings: 6
Overcrossings: 2
Business Tracks: 4
Operations: Helper, Unit Oil / Empties, Autoracks, Passenger, Local Freight
Railroads: Union Pacifc, Amtrak

Click here to download this file

[Zecora]

I LOVE this route!

#EMDCowlFoamer

[mikebond]

I ran RouteRiter v7.6.26 on Cuesta Grade V2.0 and received the following errors (yes I did install all 5 parts):


Sound file SLS_Switchwork.sms is missing from your route, no alternative is available in the other installed routes. Called by J:\MSTS\Routes\SLS_CuestaV2\ttype.dat
Sound file x_SLS_Switchwork.sms is missing from your route, no alternative is available in the other installed routes. Called by J:\MSTS\Routes\SLS_CuestaV2\ttype.dat

Mike

[bandorr2000]

I also got the same sms errors, but ran the entire route without errors.

[mikebond]

 bandorr2000, on 08 January 2015 - 04:44 PM, said:

I also got the same sms errors, but ran the entire route without errors.

I also ran the entire route (Northbound Oilcans activity) in OR without errors. I didn't try it in MSTS, though....

Mike

[That Genset Foamer]

Should work just fine in MSTS. "SLS_Switchwork.sms" is not used anywhere in the route, and the SMS file that would have been provided is incredibly dodgy so I opted to leave it out.

[Tomsierra]

I downloaded Cuesta Grade V2.0 and it installed OK, but running it on Open Rail the Track has missing sections. Is a fix available or does anyone know how to correct this problem? Thanks

[ckawahara]

 Tomsierra, on 31 May 2015 - 10:20 AM, said:

I downloaded Cuesta Grade V2.0 and it installed OK, but running it on Open Rail the Track has missing sections. Is a fix available or does anyone know how to correct this problem? Thanks

You do have all the required downloads installed don't you? Check your log file and see what shapes are missing.

[Tomsierra]

 ckawahara, on 31 May 2015 - 01:17 PM, said:

You do have all the required downloads installed don't you? Check your log file and see what shapes are missing.

I HAVE ALL THE DOWNLOADS AND SHAPE FILES ANY OTHER TIPS THANK YOU TOMSIERRA PS I HAVE A SCREEN SHOT BUT CAN NOT POST IT HERE.

[That Genset Foamer]

Not sure if I have seen any of the missing sections issues. You'll need the most recent build of Scalerail (1.77) and Scaleroad (1.6) for the route to work. Any preceding builds of the two (i.e. the FPM Surfliner Scalerail set) will result in missing textures or shapes.