Log In
Register Now!
Help
http://www.elvastowe...code=sst&id=372
File Name: Springfield Terminal Railway 8 Maintenance Service Line Car
File Submitter: charland
File Submitted: 20 Aug 2008
File Updated: 29 Aug 2009
File Category: Light Electrics
MSTS Springfield Terminal Railway 8
STR 8 was a maintenance service line car until 1956 when the car was trucked to the Warehouse Point museum in Connecticut.
Requires MSTS BIN 1.7 or higher available at:
http://mstsbin.uktra...om/eng/eng.html
STR 8 is a Paul Charland model created using TS Modeler, along with several Tim Muir shapes and textures.
Paul :-)
Click here to download this file
Page 1 of 1
Springfield Terminal Railway 8 Maintenance Service Line Car
Rate Topic:
#1
- Vice President
-
- Group: Status: Elite Member
- Posts: 2,523
- Joined: 13-April 08
- Gender:Male
- Location:Brockville, ON, CA
- Simulator:MSTS/OR
-
Country:
Posted 20 August 2008 - 04:40 PM
#2
- Vice President
-
- Group: Status: First Class
- Posts: 2,566
- Joined: 24-July 06
- Gender:Male
- Location:Cincinnati, Ohio, USA
- Simulator:MSTS
-
Country:
Posted 20 August 2008 - 07:41 PM
charland, on Aug 20 2008, 08:40 PM, said:
STR 8 is a Paul Charland model created using TS Modeler, along with several Tim Muir shapes and textures.
Paul :-)
Click here to download this file
Paul :-)
Click here to download this file
A real beauty, Paul :pleasantry:
RGF
#3
- Vice President
-
- Group: Status: Elite Member
- Posts: 2,523
- Joined: 13-April 08
- Gender:Male
- Location:Brockville, ON, CA
- Simulator:MSTS/OR
-
Country:
Posted 21 August 2008 - 02:59 AM
Thanks Rick,
Was fun to draw, was even better when it opened in MSTS without a fight!
Paul :-)
Was fun to draw, was even better when it opened in MSTS without a fight!
Paul :-)
#4
- Vice President
-
- Group: Status: Elite Member
- Posts: 2,523
- Joined: 13-April 08
- Gender:Male
- Location:Brockville, ON, CA
- Simulator:MSTS/OR
-
Country:
Posted 21 August 2008 - 03:35 AM
Hi All,
I forgot to change the bounding box information in the engine file!
Here's a copy of the corrected file and I have changed the str_8.zip file in the library.
STR_8.eng.zip (3.66K)
Number of downloads: 2
Sorry for any inconvenience,
Paul :-)
I forgot to change the bounding box information in the engine file!
Here's a copy of the corrected file and I have changed the str_8.zip file in the library.
STR_8.eng.zip (3.66K)
Number of downloads: 2
Sorry for any inconvenience,
Paul :-)
#5
- Superintendant
-
- Group: ET Admin
- Posts: 1,238
- Joined: 23-December 04
- Gender:Male
- Location:Sarasota, FL
- Simulator:ORTS
-
Country:
Posted 21 August 2008 - 06:05 AM
charland, on Aug 21 2008, 07:35 AM, said:
Hi All,
I forgot to change the bounding box information in the engine file!
Here's a copy of the corrected file and I have changed the str_8.zip file in the library.
STR_8.eng.zip
Sorry for any inconvenience,
Paul :-)
I forgot to change the bounding box information in the engine file!
Here's a copy of the corrected file and I have changed the str_8.zip file in the library.
STR_8.eng.zipSorry for any inconvenience,
Paul :-)
Paul,
Great car there, and thanks for keeping on top of things. In looking at the file you attached, it must be renamed before it can be used as it is named STR_8.eng.eng. Just a simple rename, but it isn't just a drag and drop.
Paul
#6
- Vice President
-
- Group: Status: Elite Member
- Posts: 2,523
- Joined: 13-April 08
- Gender:Male
- Location:Brockville, ON, CA
- Simulator:MSTS/OR
-
Country:
Posted 21 August 2008 - 06:18 AM
Hi Paul,
Yes, just remove one of the ".eng" should do the trick, I needed to add one to make sure it wasn't going to overwrite the real "str_8" files. This is just a bounding box adjustment I missed, the car runs fine without this file, it may not couple so nicely though!
Paul :-)
Yes, just remove one of the ".eng" should do the trick, I needed to add one to make sure it wasn't going to overwrite the real "str_8" files. This is just a bounding box adjustment I missed, the car runs fine without this file, it may not couple so nicely though!
Paul :-)
Page 1 of 1