Log In
Register Now!
Help
I have a few instances where "normal" tracks have been overlaid over the top of each other to form a Crossover.
In MSTS RE, it was possible to add another track node item (such as a Hazard), and then manually edit this into a CrossoverTrItemData as described in the tutorial formally on the Steam4me site (Creating a Diamond Crossover complete with Track Node).
Does TSRE support this type of track node, by making it visible, allow it to be selected, dragged, etc?
Does TSRE support the placement of Hazard track objects, by making it visible, allow it to be selected, dragged, etc?
It would be handy to facilitate this, as the crossover node can control the signals, and also be used as a trigger for track joint sounds, etc.
Is there another way to do this?
Page 1 of 1
Adding "manual" Crossovers
Rate Topic:
#1
- Open Rails Developer
-
- Group: Posts: Elite Member
- Posts: 1,943
- Joined: 24-June 11
- Gender:Male
-
Country:
Posted 25 May 2024 - 10:32 PM
#2
- Superintendant
-
- Group: Posts: Elite Member
- Posts: 1,019
- Joined: 01-March 15
- Gender:Male
- Simulator:Alföld
-
Country:
Posted 25 May 2024 - 11:08 PM
steamer_ctn, on 25 May 2024 - 10:32 PM, said:
Does TSRE support this type of track node, by making it visible, allow it to be selected, dragged, etc?
...
Hello.
Unfortunately, it doesn't support anything, but it would be great.
Requests can be made at the link below.
TSRE changes / wish list
Sincerely, Laci 1959
Page 1 of 1