I simply placed this as a test ( as its been a while since I messed about with files in OR and MSTS) into the folder I have for routes called open rails DLC (I think this is one TRainsim creates when you download and install a route)
So I have OpenrailsDLC/Trainsimulations/Trains/trainset and here I placed the downloaded files (SF-SD75m_superF -Common Sound - SHR Cabs).. obviously the common sounds installed into the already existent common sound folder - adding MLW_710G3C and MLW_Horns.
As a test I then made a consist for a light engine only and placed it into the scenic route to see if all was successful.. And it is - apart from no sound?
This is a clean OR install with no MSTS attached/installed anymore if that helps.
Page 1 of 1
Help required - No Sound with the SF SD 75M download
#2
Posted 28 March 2024 - 05:42 AM
I would use MSTS Check, a utility program by "slipperman" --- very useful to find the problem with missing sound and cabview files. Easy to use. In the download library.
MSTS Check
MSTS Check
#3
Posted 28 March 2024 - 05:55 AM
Hi ightenhill,
Which download - please give .zip file name, and from where it can be downloaded.
Thanks
Ged
Which download - please give .zip file name, and from where it can be downloaded.
Thanks
Ged
#4
Posted 28 March 2024 - 06:11 AM
slipperman, on 28 March 2024 - 05:55 AM, said:
Hi ightenhill,
Which download - please give .zip file name, and from where it can be downloaded.
Thanks
Ged
Which download - please give .zip file name, and from where it can be downloaded.
Thanks
Ged
https://www.elvastow...pen-rail-sonly/
hmm think there is an issue when I read the support forum in that link - must have missed it before
SOLVED -- SND instead of SOUND in eng as spotted by @Weter
#5
Posted 28 March 2024 - 07:41 AM
Hi ightenhill,
Thanks for the link - and I'm pleased you solved the problem :)
Cheers,
Ged
Thanks for the link - and I'm pleased you solved the problem :)
Cheers,
Ged
Page 1 of 1