Log In
Register Now!
Help
File Name: Open Rails Sounds - EMD 645 (with roots blower)
File Submitter: ErickC
File Submitted: 03 Mar 2024
File Category: Diesel Locomotive models (new 1960-89) Open Rails only
Models covered: 6-645E, 8-645E, 12-645E, 16-645BC, 16-645C, 16-645E. Locomotive fit: VR Y class (last 25), SW1000, SW1500, GP15-1, GP10, GP16, GP38, SD38, GP38-2, SD38-2, and any 567-series locomotive with 645 power assemblies installed. You must follow the directions or these will not work. Includes physics files. By North American V-Scale.
Click here to download this file
Page 1 of 1
Open Rails Sounds - EMD 645 (with roots blower)
Rate Topic:
#1
- Superintendant
-
- Group: Status: Elite Member
- Posts: 1,001
- Joined: 18-July 17
- Gender:Male
- Location:Hastings, MN, US
- Simulator:ORTS
-
Country:
Posted 03 March 2024 - 06:51 AM
#2
- Member, Board of Directors
-
- Group: ET Admin
- Posts: 6,932
- Joined: 01-June 20
- Gender:Not Telling
- Simulator:ORTS
-
Country:
Posted 03 March 2024 - 06:58 AM
Hello.
May I know:
rehaul?
May I know:
Quote
567-series locomotive with 645 power assemblies installed
rehaul?
#3
- Open Rails Developer
-
- Group: ET Admin
- Posts: 1,774
- Joined: 26-February 08
- Gender:Male
- Location:Eltham, Victoria, Australia
- Simulator:ORNYMG
-
Country:
Posted 03 March 2024 - 10:31 AM
Hi Erick,
You have mentioned the Y class from Victoria, Australia, that I spent my railway life climbing up and down on.
Very fond memories.
You have mentioned the Y class from Victoria, Australia, that I spent my railway life climbing up and down on.
Very fond memories.
#4
- Superintendant
-
- Group: Status: Elite Member
- Posts: 1,001
- Joined: 18-July 17
- Gender:Male
- Location:Hastings, MN, US
- Simulator:ORTS
-
Country:
Posted 06 March 2024 - 09:47 AM
Weter, on 03 March 2024 - 06:58 AM, said:
Hello.
May I know:
rehaul?
May I know:
rehaul?
The readme goes into more detail, but any AC, BC, or C block can accept 645 power assemblies. Railroads often performed this retrofit as the 645 assemblies are more durable and it often eliminated the need to stock both 567 and 645 parts when the 40-series came out.
#5
- Apprentice
-
- Group: Status: Active Member
- Posts: 35
- Joined: 21-June 12
- Gender:Male
- Location:Manassas, VA
- Simulator:Open Rails
-
Country:
Posted 28 March 2024 - 09:19 AM
ErickC, on 06 March 2024 - 09:47 AM, said:
The readme goes into more detail, but any AC, BC, or C block can accept 645 power assemblies. Railroads often performed this retrofit as the 645 assemblies are more durable and it often eliminated the need to stock both 567 and 645 parts when the 40-series came out.
I believe Amtrak did this when rebuilding Their FL9's.
Page 1 of 1