Elvas Tower: Probably a dumb question....but... - Elvas Tower

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Probably a dumb question....but... Rate Topic: -----

#1 User is offline   Amtrak115 

  • Fireman
  • Group: Status: Active Member
  • Posts: 201
  • Joined: 04-August 19
  • Gender:Male
  • Location:Parker, TX
  • Simulator:open rails
  • Country:

Posted 24 June 2023 - 07:57 PM

If you build a consist with 2 loco's up front and 2 loco's on the rear ....will all 4 loco's be working...I know the rear ones won't act like real dpu's...but are they working, i.e. pushing on the train???

amtrak115

#2 User is offline   eric from trainsim 

  • Waste Disposal Engineer
  • Group: Private - Open Rails Developer
  • Posts: 1,582
  • Joined: 30-October 10
  • Gender:Male
  • Simulator:ORTS
  • Country:

Posted 24 June 2023 - 09:59 PM

They will be working.

#3 User is offline   engmod 

  • Open Rails Developer
  • PipPipPipPipPipPipPip
  • Group: ET Admin
  • Posts: 1,791
  • Joined: 26-February 08
  • Gender:Male
  • Location:Eltham, Victoria, Australia
  • Simulator:ORNYMG
  • Country:

Posted 25 June 2023 - 03:35 AM

And they will be on the same notch as the lead loco.

#4 User is offline   Amtrak115 

  • Fireman
  • Group: Status: Active Member
  • Posts: 201
  • Joined: 04-August 19
  • Gender:Male
  • Location:Parker, TX
  • Simulator:open rails
  • Country:

Posted 25 June 2023 - 06:52 AM

View PostWeter, on 24 June 2023 - 09:21 PM, said:

Hello, Barry.
There are no dumb questions, there can be dumb answers.
One of those is: what Your own experiment would show?
Force HUD and locomotive HUD will be helpful.


thanks for the answers...thought about the HUD...but after I loged off the system last night....

later

Amtrak115

#5 User is offline   Niknak 

  • Conductor
  • Group: Status: First Class
  • Posts: 280
  • Joined: 19-July 20
  • Gender:Male
  • Location:Kent UK
  • Simulator:OR NewYear MG
  • Country:

Posted 26 June 2023 - 01:29 AM

Also you can toggle the power on and off by clicking on the loco(s) displayed by using the F9 key.

#6 User is offline   joe_star 

  • Fireman
  • Group: Status: Active Member
  • Posts: 209
  • Joined: 16-January 13
  • Gender:Male
  • Simulator:MSTS
  • Country:

Posted 27 June 2023 - 09:44 AM

I believe all 4 locomotives including those at the rear will operate with the same physics calculations as the main player locomotive

Notches and brakes will be set similar to the player loco
Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users