Log In
Register Now!
Help
I have problems by keeping max speed for some of my consists. The value of MaxVelocity in both the .con and .eng files are correct. I have testet 26 consists. The 9 of them stops accelerate when max velocity is reached even if I keep full throttle. The last 17 consists continue accelerating besides the MaxVelocity. I would like all my consists to keep MaxVelocity. Any idea to help me.
Page 1 of 1
Keeping max. speed for consists
Rate Topic:
#1
- Fireman
-
- Group: Status: Active Member
- Posts: 122
- Joined: 11-November 13
- Gender:Male
- Location:Copenhagen
- Simulator:OpenRails & MSTS
-
Country:
Posted 22 May 2023 - 01:20 AM
#2
- Superintendant
-
- Group: Status: Elite Member
- Posts: 1,252
- Joined: 25-September 17
- Gender:Male
- Simulator:Open Rails
-
Country:
Posted 22 May 2023 - 01:48 AM
This sounds unusual. Could you attach some of the .con and .eng files for consists and locomotives that do not work and then maybe someone can look at the problem.
#3
- Fireman
-
- Group: Status: Active Member
- Posts: 122
- Joined: 11-November 13
- Gender:Male
- Location:Copenhagen
- Simulator:OpenRails & MSTS
-
Country:
Posted 22 May 2023 - 06:24 AM
darwins, on 22 May 2023 - 01:48 AM, said:
This sounds unusual. Could you attach some of the .con and .eng files for consists and locomotives that do not work and then maybe someone can look at the problem.
Attached File(s)
-
DB ICE3 403.con (1.66K)
Number of downloads: 91 -
ICE3_403_0.eng (28.2K)
Number of downloads: 87
#4
- Foreman Of Engines
-
- Group: Status: Contributing Member
- Posts: 953
- Joined: 01-March 15
- Gender:Male
- Simulator:Alföld
-
Country:
Posted 22 May 2023 - 06:50 AM
Hello.
The problem is that there is a 40m/s limit in the consist file. Which corresponds to a speed of 144 km/h. The MaxVelocity ( ) line of the con file needs to be fixed. The following is a good value: MaxVelocity ( 55.55555 1.00000 ).
In the eng file, find the MaxVelocity ( ) line. If the data there is given in kmh, then divide it by 3.6. The result will be m/s. This should be the first value of MaxVelocity.
You can use the downloadable Metric Converter for corrections.
Sincerely, Laci1959
Ps I always check the value of the different consist editors
The problem is that there is a 40m/s limit in the consist file. Which corresponds to a speed of 144 km/h. The MaxVelocity ( ) line of the con file needs to be fixed. The following is a good value: MaxVelocity ( 55.55555 1.00000 ).
In the eng file, find the MaxVelocity ( ) line. If the data there is given in kmh, then divide it by 3.6. The result will be m/s. This should be the first value of MaxVelocity.
You can use the downloadable Metric Converter for corrections.
Sincerely, Laci1959
Ps I always check the value of the different consist editors
#5
- Fireman
-
- Group: Status: Active Member
- Posts: 122
- Joined: 11-November 13
- Gender:Male
- Location:Copenhagen
- Simulator:OpenRails & MSTS
-
Country:
Posted 23 May 2023 - 11:55 PM
I have three more consists eng where the settings seems to be correct but the maxvelocity is exceeded. Could you please check them.
Attached File(s)
-
Number of downloads: 90 -
tser218260 Bugsering.eng (37.04K)
Number of downloads: 84 -
Number of downloads: 84 -
HSB_DT_187.eng (45.4K)
Number of downloads: 83 -
Number of downloads: 86 -
TKK-RDK_MZ_IV_1448 Nato.eng (35.8K)
Number of downloads: 82
#6
- Foreman Of Engines
-
- Group: Status: Contributing Member
- Posts: 953
- Joined: 01-March 15
- Gender:Male
- Simulator:Alföld
-
Country:
Posted 24 May 2023 - 12:49 AM
Good, but I need a list of which consist I should set to which speed.
File name >> speed km/h
FCS 218 260-8 Solo Bugsering >> 140km/h is this correct?
File name >> speed km/h
FCS 218 260-8 Solo Bugsering >> 140km/h is this correct?
#7
- Fireman
-
- Group: Status: Active Member
- Posts: 122
- Joined: 11-November 13
- Gender:Male
- Location:Copenhagen
- Simulator:OpenRails & MSTS
-
Country:
Posted 24 May 2023 - 03:59 AM
Laci1959, on 24 May 2023 - 12:49 AM, said:
Good, but I need a list of which consist I should set to which speed.
File name >> speed km/h
FCS 218 260-8 Solo Bugsering >> 140km/h is this correct?
File name >> speed km/h
FCS 218 260-8 Solo Bugsering >> 140km/h is this correct?
#8
- Fireman
-
- Group: Status: Active Member
- Posts: 122
- Joined: 11-November 13
- Gender:Male
- Location:Copenhagen
- Simulator:OpenRails & MSTS
-
Country:
Posted 24 May 2023 - 04:04 AM
FCS 218 260-8 Solo Bugsering 140km/h
DB HSB 187x2 50km/h
DSB MZ 1448 Skoleudflugt 120km/h
Thanks in advance
DB HSB 187x2 50km/h
DSB MZ 1448 Skoleudflugt 120km/h
Thanks in advance
#9
- Foreman Of Engines
-
- Group: Status: Contributing Member
- Posts: 953
- Joined: 01-March 15
- Gender:Male
- Simulator:Alföld
-
Country:
Posted 26 May 2023 - 08:45 AM
Hello.
I looked through it and matched the files. These settings are fine. The speed value in each consist file is the same as the value specified in the eng file.
Sincerely, Laci1959
I looked through it and matched the files. These settings are fine. The speed value in each consist file is the same as the value specified in the eng file.
Sincerely, Laci1959
#10
- Fireman
-
- Group: Status: Active Member
- Posts: 122
- Joined: 11-November 13
- Gender:Male
- Location:Copenhagen
- Simulator:OpenRails & MSTS
-
Country:
Posted 28 May 2023 - 11:22 PM
Now I have discovered that all my consists with electric engines keeps the maxvelocity speed when reached but none of my consists with diesel engines do that they just keep on accelerate even when the settings in both the .eng and .con file are correct. Are there any explanation for this and how can I keep the maxvelocity on diesel engines.
Page 1 of 1