Log In
Register Now!
Help
Hello.
I have a locomotive that I am having trouble restoring. Unfortunately, Shape Converter R4 does not work for this model, the program crashes during conversion, the log file writes an error. Is there any other program that can be used to solve the conversion so that the model can be edited?
Page 1 of 1
MSTS Shape to 3ds or obj
Rate Topic:
#1
- Apprentice
-
- Group: Status: Active Member
- Posts: 30
- Joined: 27-November 21
- Gender:Male
- Simulator:MSTS, OR
-
Country:
Posted 08 November 2022 - 01:10 AM
#2
- Conductor
-
- Group: Status: Active Member
- Posts: 268
- Joined: 15-March 20
- Gender:Male
- Location:Barcelona, Catalunya
- Simulator:Open Rails
-
Country:
Posted 08 November 2022 - 09:39 AM
Hello Marci!
Make sure it is unzipped before using Shape Converter.
It happened to me that sfm wouldn't let me uncompress an .s file. Then,I used Polymaster 2.10.31 to uncompress it and it worked.
Good luck!
Make sure it is unzipped before using Shape Converter.
It happened to me that sfm wouldn't let me uncompress an .s file. Then,I used Polymaster 2.10.31 to uncompress it and it worked.
Good luck!
#3
- Apprentice
-
- Group: Status: Active Member
- Posts: 30
- Joined: 27-November 21
- Gender:Male
- Simulator:MSTS, OR
-
Country:
Posted 08 November 2022 - 09:49 AM
VAPOR3D, on 08 November 2022 - 09:39 AM, said:
Hello Marci!
Make sure it is unzipped before using Shape Converter.
It happened to me that sfm wouldn't let me uncompress an .s file. Then,I used Polymaster 2.10.31 to uncompress it and it worked.
Good luck!
Make sure it is unzipped before using Shape Converter.
It happened to me that sfm wouldn't let me uncompress an .s file. Then,I used Polymaster 2.10.31 to uncompress it and it worked.
Good luck!
Hi.
The model must have been unpacked. sfm didn't unpack the compressed version, so I had to solve it with TrainSimZipper, but it didn't accept it either. The program mentioned later must be good, because I have done shape restoration this way several times. Thanks for the suggestion!
#4
- Apprentice
-
- Group: Status: Active Member
- Posts: 30
- Joined: 27-November 21
- Gender:Male
- Simulator:MSTS, OR
-
Country:
Posted 08 November 2022 - 10:22 AM
Marci, on 08 November 2022 - 09:49 AM, said:
Hi.
The model must have been unpacked. sfm didn't unpack the compressed version, so I had to solve it with TrainSimZipper, but it didn't accept it either. The program mentioned later must be good, because I have done shape restoration this way several times. Thanks for the suggestion!
The model must have been unpacked. sfm didn't unpack the compressed version, so I had to solve it with TrainSimZipper, but it didn't accept it either. The program mentioned later must be good, because I have done shape restoration this way several times. Thanks for the suggestion!
I also found an error code, but I don't know what it means. The error code is: 12/2/9/3/0/0
Page 1 of 1