Has anyone seen this issue with the autopaint option for creating a road bed below the tracks?
Clipboard 2.jpg (1.13MB)
Number of downloads: 11
It only follows one .tdb line on multi track sections. Tried it on numerous routes with no success. Using TSRE5_v0.7.002 on a new Windows 11 system, but there were no problems with it on my Windows 7 system.
Thanks :)
Page 1 of 1
TSRE Autopaint problem
#2
Posted 01 May 2022 - 03:30 AM
Yes, that's correct. It paints one tdb line or rdb line at a time.
Does the same thing with roads, one lane/direction at a time.
Randy
Does the same thing with roads, one lane/direction at a time.
Randy
#3
Posted 01 May 2022 - 03:52 AM
There is no way to select the second .tdb line. Doing the process again only increases the amount of paint in the same place.
#4
Posted 01 May 2022 - 01:34 PM
The answer seems to be a wide, feathered circle. I don't recall what is provided w/ the software but you can add your own 1-bitmap brush tools to TSRE, look in "[Drive]:\....\tsre_appdata\[version number you installed]\brush".
#5
Posted 04 May 2022 - 01:28 AM
Found the answer. Have to right click on the opposite side of the track and repeat the task I did for the first side. 100% certain it did each tdb line at once before though https://static.xx.fbcdn.net/images/emoji.php/v9/t34/1/16/1f914.png But whatever, it works now https://static.xx.fbcdn.net/images/emoji.php/v9/t51/1/16/1f603.png
Thanks everyone.
Thanks everyone.
Page 1 of 1