http://www.elvastowe...eenshot&id=3082
File Name: OR APP_80
File Submitter: charland
File Submitted: 28 Feb 2022
File Category: Diesel Locomotives (new before 1960) Open Rails only
OR APP_80
Abitibi Power and Paper 80 was an MLW
S-4 acquired new in 1950.
Created in TS-Modeler by Paul Charland.
Click here to download this file
Page 1 of 1
OR APP_80
#2
Posted 03 March 2022 - 08:57 AM
Hello, Paul
Please, check for cab: it looks like main view and animated controls belong to different cabs and not match.
I like the sound and hope, the trucks would be some day better textured.
Very pleasure color!
Please, check for cab: it looks like main view and animated controls belong to different cabs and not match.
I like the sound and hope, the trucks would be some day better textured.
Very pleasure color!
#3
Posted 03 March 2022 - 09:39 AM
If you replace S4_Front_WP.ace with GenSx-frnt.ace in the S1.cvf file all the cab items will line up correctly. I don't know which files work with the S4_Front_WP.ace.
#4
Posted 03 March 2022 - 12:36 PM
Would someone be so kind as to test this before I upload them to the libraries?
Turns out to be APP_80, ONR_1202 and 1203 all have the same problem. It has to do with me replacing the cabview ace files, the front has the two center windows covered and there is a new rear cabview. The fix is simple, just need to replace the ENG file with the right cabview line, and replace the or add the proper cvf file to the cabview folder, all the graphics are already in the folder.
ReplacementFiles.zip (17.76K)
Number of downloads: 13
Paul :-)
Turns out to be APP_80, ONR_1202 and 1203 all have the same problem. It has to do with me replacing the cabview ace files, the front has the two center windows covered and there is a new rear cabview. The fix is simple, just need to replace the ENG file with the right cabview line, and replace the or add the proper cvf file to the cabview folder, all the graphics are already in the folder.
ReplacementFiles.zip (17.76K)
Number of downloads: 13
Paul :-)
Page 1 of 1