http://www.elvastowe...eenshot&id=2963
File Name: OR 1977 BN Signal System
File Submitter: ebnertra000
File Submitted: 14 Mar 2021
File Category: Signals & Signs
This is a set using BN's signal rules from 1977. They had changed considerably since the CCOR days, and would do so again by the 90s. The set is modeled using GRS Type SA searchlights. Both .ace and .dds textures are available.
Click here to download this file
Page 1 of 1
OR 1977 BN Signal System
#2
Posted 23 March 2021 - 10:20 AM
Travis,
I've been trying to get the signals from the BN77 set working.
I've tried several configurations of this and think I'm getting more confused.
Figured I'd ask,
This is what I'm trying to do
3SIG.JPG (98.64K)
Number of downloads: 2
I'm using a two head with the LYR on the bottom and I'm trying to link it to the diverging route that has an animated switchstand with it's own signal entries.
I'm using the control signal to try and link it all together.
I couldn't get it to work without one either.
These are the link setups in order.
SLSigLink.JPG (35.45K)
Number of downloads: 0 CTRLLink.JPG (35.47K)
Number of downloads: 0 SWLink.JPG (24.3K)
Number of downloads: 0
Thanks
Randy
I've been trying to get the signals from the BN77 set working.
I've tried several configurations of this and think I'm getting more confused.
Figured I'd ask,
This is what I'm trying to do
3SIG.JPG (98.64K)
Number of downloads: 2
I'm using a two head with the LYR on the bottom and I'm trying to link it to the diverging route that has an animated switchstand with it's own signal entries.
I'm using the control signal to try and link it all together.
I couldn't get it to work without one either.
These are the link setups in order.
SLSigLink.JPG (35.45K)
Number of downloads: 0 CTRLLink.JPG (35.47K)
Number of downloads: 0 SWLink.JPG (24.3K)
Number of downloads: 0
Thanks
Randy
#3
Posted 23 March 2021 - 12:06 PM
You've got the Last Signal option checked, which shouldn't affect anything, but won't work anyway, since it has to have 'Enable Special States' selected to work. I'm hoping I can come up with a way to simplify that setup, but I haven't found it yet.
The entries on the control signal with the [B] face backwards. The back-facing diverging route probably shouldn't be there. It will only work if '[B] Back-facing - select only one if needed' activates the back-facing control signal functions, so it's not even active.
The control signal could actually be put on the siding track, since the switchstand won't interfere with it functioning. That would remove the need for linking the route.
LYR (lunar-yellow-red) heads are a curious thing to use on a diverging route in any case. You don't want Restricting, do you?
I can try to cook up a sample of a setup that should work
The entries on the control signal with the [B] face backwards. The back-facing diverging route probably shouldn't be there. It will only work if '[B] Back-facing - select only one if needed' activates the back-facing control signal functions, so it's not even active.
The control signal could actually be put on the siding track, since the switchstand won't interfere with it functioning. That would remove the need for linking the route.
LYR (lunar-yellow-red) heads are a curious thing to use on a diverging route in any case. You don't want Restricting, do you?
I can try to cook up a sample of a setup that should work
Page 1 of 1