[GTADon]

Hello, along with the new download of the RF&P Route V3, there is a Switch Tower that does not show up in the sim nor with Shape Viewer.
I have tried to fix it with "Shape Fix" & SFM 25 Compressed and Uncompressed, but no luck. It gives me an "automation error #205530516".
The shape in question is RFP_tower.s which is also available at T-S. Any suggestions? Thank you.

[steved]

I found it in my stuff.
The .s file was uncompressed so I compressed it.
It shows up in TSRE and I can place it in the sim but it does indeed show the error in Shape viewer.

https://i.imgur.com/PYxEp8u.png?1

I'm talking strictly OpenRails here.

Randy

[lineman]

I just fiddled with this file tonight and found that the dkred.ace texture was the problem. Copied the red texture color to a copy of the black texture and renamed to dkred.ace and all is well.

[GTADon]

lineman, on 09 March 2021 - 07:06 PM, said:

I just fiddled with this file tonight and found that the dkred.ace texture was the problem. Copied the red texture color to a copy of the black texture and renamed to dkred.ace and all is well.

I looked and looked, this is great. Thank you. I tried that, it is only 8 x 8 and shows when I open the ACE file, the "black" texture is also 8 x 8 but does not present a problem. It did not work for me.

[lineman]

The black texture in my route is 16 x 16 and the file opens correctly with the modified dkred texture

[GTADon]

lineman, on 10 March 2021 - 11:38 AM, said:

The black texture in my route is 16 x 16 and the file opens correctly with the modified dkred texture

I looked at a couple of ways to do this. The ACE file opens fine, BTW, my Black.Ace is also 16 x 16 but I cannot get the DkRed enlarged to 16x16, I am doing something wrong. Also RFP_Tower does open properly in TSRE5. My AceIt is working, SFM is working. It just bothers me, I know it should not, but it does.
Hrmmph. I have done changes like this before, but not often enough to get proficient at it. My old brain just cannot do it.

[lineman]

Just copy the black ace. Color it to match the dkred.ace; then rename the black.ace copy to dkred.ace

[GTADon]

lineman, on 10 March 2021 - 06:02 PM, said:

Just copy the black ace. Color it to match the dkred.ace; then rename the black.ace copy to dkred.ace

OK, I will try again tomorrow. Thank you.