[jdgremsjr]

Niknak, on 24 April 2024 - 01:49 AM, said:

There's a discussion on Trainsim.com about the washer. See here: https://www.trainsim...ins#post2301204

I'm aware, this is official thread for Carlos' Build and it will probably take some tinkering under the hood.

[Csantucci]

Re the car washer: Shift-T has changed effect since some time. You can try using Ctrl-T, which is the keystroke combination that has replaced Shift-T.
If it doesn't work either, you can try with T or Y.

[alteo80]

hello, I don't know if anyone else has observed this, but the AI ​​trains loaded at the start of the simulation do not respect the speed limits...the AI trains which appear during the simulation do not have speed problems. tested only on openrails mg 151.2
thank you and good evening

[Csantucci]

I have done a test with ORNYMG 151.2 and with stable 1.5.1 and I see the same actual speed and max allowed speed for AI trains at game startup in the dispatcher info HUD (activity mode).
So I'm asking you for some additional data:
1) do you see this in activity mode or in timetable mode?
2) what do you see in the dispatcher info HUD: an incorrect max allowed speed or an actual speed greater than the max allowed speed? In the first case, in which way is the max allowed speed incorrect? Is it higher than the speedpost speedlimits, or higher than the signal limits, or higher than the max speed for that lead locomotive or consist, or higher than the overall route speed?
3) do you see this in any route you try?

[alteo80]

Csantucci, on 30 April 2024 - 12:48 AM, said:

I have done a test with ORNYMG 151.2 and with stable 1.5.1 and I see the same actual speed and max allowed speed for AI trains at game startup in the dispatcher info HUD (activity mode).
So I'm asking you for some additional data:
1) do you see this in activity mode or in timetable mode?
2) what do you see in the dispatcher info HUD: an incorrect max allowed speed or an actual speed greater than the max allowed speed? In the first case, in which way is the max allowed speed incorrect? Is it higher than the speedpost speedlimits, or higher than the signal limits, or higher than the max speed for that lead locomotive or consist, or higher than the overall route speed?
3) do you see this in any route you try?

hello,1) in activity mode
2) for example, I see an incorrect maximum speed (108kmh) lower than that provided by the line normally (120kmh).
3) yes I see this on other lines

I hope I am not confused in my explanation thank you and have a good evening

[NZ_JOHN]

alteo80, on 30 April 2024 - 03:03 PM, said:

hello,1) in activity mode
2) for example, I see an incorrect maximum speed (108kmh) lower than that provided by the line normally (120kmh).
3) yes I see this on other lines

I hope I am not confused in my explanation thank you and have a good evening

Are you using AUTOPILOT
I notice 151.2 speeds are sometime wrong
Im waiting for the next ORNYMG151 update

[Csantucci]

alteo80, on 30 April 2024 - 03:03 PM, said:

hello,1) in activity mode
2) for example, I see an incorrect maximum speed (108kmh) lower than that provided by the line normally (120kmh).
3) yes I see this on other lines

I hope I am not confused in my explanation thank you and have a good evening

108 kmh is 90% of 120 kmh. This 0.9 factor could be the Efficiency parameter as defined in the activity file. Can you attach the .act file and the .srv file as well as the .trk file for your example? This could help me to narrow the search.

[alteo80]

NZ_JOHN, on 30 April 2024 - 04:28 PM, said:

Are you using AUTOPILOT
I notice 151.2 speeds are sometime wrong
Im waiting for the next ORNYMG151 update

hello, only with the AI ​​trains generated at the start of the simulation, those appearing during do not have this problem with the incorrect speed limits

[Csantucci]

alte80, I posted just before you. Please check my last post.

[alteo80]

Csantucci, on 01 May 2024 - 12:42 AM, said:

alte80, I posted just before you. Please check my last post.

hello, yes I thought about the Efficiency parameter, set to 1, no change, and the trains loaded during the simulation with an Efficiency parameter at 0.75 respect the maximum speed of the line. strange but I would live with it. thank you for investigating