Elvas Tower: Brass ALCO RSD-15 6 axle road Switcher-TSM resource kit - Elvas Tower

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Brass ALCO RSD-15 6 axle road Switcher-TSM resource kit Rate Topic: -----

#1 User is offline   B & O GUY 

  • Vice President
  • Group: Status: Elite Member
  • Posts: 2,354
  • Joined: 14-May 08
  • Gender:Not Telling
  • Location:New York State
  • Simulator:Open Rails
  • Country:

Posted 22 December 2017 - 04:37 PM

http://www.elvastowe...eenshot&id=2667
File Name: Brass ALCO RSD-15 6 axle road Switcher-TSM resource kit
File Submitter: B & O GUY
File Submitted: 22 Dec 2017
File Category: 3D Modeling Utilites and Source Files

Brass ALCO RSD-15 6 axle road Switcher-TSM resource kit by B & O GUY

Detail's here (http://www.thediesel.../DataRSD15.HTML)
A powerfull locomotive of 2400 hp. with only 75 domestic unit's sold.
With the 251B V16 it's reliability was much better than with the previous
244 engined RSD-7. . The Santa Fe was the biggest user at 55 unit's.

There are 2 cab's and nose's with this kit. Most all the Eastern user's
opted for the high nose version while the Western user's opted for the
low nose. Both are included here. The High nose was set up to use bitmap
textures with a small alpha texture for the window's while the low nose
was set up to use TGA{Targa) textures with the Alpha channel to cut the
opening's in the cab for the window's. A small 256 X 256 alpha channel
texture is needed for the window's.

Credits:
An Orginal Model by Allen Norton "Nortec"-B&O Guy"
Couplers and Air Hoses by "Tim Muir"..

The model can be imported by 3DCanvas and possibly 3DCrafter
for use in those programs.

No support is offered or will be given. Use the forum for questions.
-----------------------------------------------------------------
Legals:

Have fun and give proper credit.

I or we are not responsible for any damage to your computer or
programs because of you loading this file on or in your Train Sim
Modeler or 3DCanvas/Crafter. You bear the sole responsibility for
any problems you may encounter. Any other problems you may
encounter while modeling and texturing the model are and will be
considered part of your learning experience.
--------------------------------------------------------------
Model statistics;
No textures are included with this kit.
--------------------------------------------------------------------------------
If you need to contact me you may do so here at Elvas Tower.

Thank you
Allen Norton-"B&O Guy"

Click here to download this file

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users