When working on yards or mainlines, I'd usually pre-load a specific set of track pieces into the "Recently Used" list that I would be using to make ladder tracks, crossovers, etc.
Here's an example of the sections I load for a yard with Scalerail 6D pieces...
SR_1tSwt_w_m06dL.s SR_1tSwt_w_m06dR.s SR_1tEnd_w_06d.s SR_1tStr_y_000_2m.s SR_1tStr_w_005_5m.s SR_1tStr_w_020m.s SR_1tStr_w_025m.s
Could TSRE be modified to read in a structured list of sections so that they show up as an option in one of the dropdowns?
Ideally, a route builder could set up several of these quick pick lists for different uses, with a mix of items e.g. some might be all track sections, some could be signal parts & static opbjects
[Group = "Yard Scalerail"] TrackObj SR_1tSwt_w_m06dL.s TrackObj SR_1tSwt_w_m06dR.s TrackObj SR_1tEnd_w_06d.s TrackObj SR_1tStr_y_000_2m.s TrackObj SR_1tStr_w_005_5m.s TrackObj SR_1tStr_w_020m.s TrackObj SR_1tStr_w_025m.s [Group = "CNW Gantry Signals"] Static CNW-ATS-Inductor.S Signal "CNW Interval (gantry mount)" Signal "CNW Absolute (gantry mount)" Signal "CNW Absolute Gantry - 2 head" Signal "CNW Absolute Gantry - 3 head" Static 2tdetailsignalbridge.s Static 3tdetailsignalbridge.s Static 4tdetailsignalbridge.s