Some level crossings placed in TSRE on big route don't work in Open Rails and MSTS.
Gates are closed, but cars still go through tracks.
How it could be possible? I don't know where to look for clues?
On my small test route everything works ok.
Page 1 of 1
Level Crossing help.
#2
Posted 12 February 2017 - 01:23 PM
Ok, I see what is wrong. It is broken on my test route too, but surprisingly don't know how, it works in OR.
And I found what is wrong. Position on road vector is too big. I broke it when I did nice looking platforms and carspawners ...
http://i.imgur.com/n7a029N.png
And I found what is wrong. Position on road vector is too big. I broke it when I did nice looking platforms and carspawners ...
http://i.imgur.com/n7a029N.png
#3
Posted 17 February 2017 - 06:23 AM
Please tell me how to:-
1) Add Level Crossing:-Cannot place level crossing in my route
2) Add road traffic
3) Create a river of certain desired depth over which the bridges have to be laid...
Please note that now signals work well.
1) Add Level Crossing:-Cannot place level crossing in my route
2) Add road traffic
3) Create a river of certain desired depth over which the bridges have to be laid...
Please note that now signals work well.
#4
Posted 17 February 2017 - 06:38 AM
Rohit R Krishnan, on 17 February 2017 - 06:23 AM, said:
1) Add Level Crossing:-Cannot place level crossing in my route
If you created new route using TSRE, it has missing "level crossing" from .ref file. Just add some to .ref file.
Rohit R Krishnan, on 17 February 2017 - 06:23 AM, said:
2) Add road traffic
Place "Car Spawner" just like platforms and sidings, but on roads.
Rohit R Krishnan, on 17 February 2017 - 06:23 AM, said:
3) Create a river of certain desired depth over which the bridges have to be laid...
http://koniec.org/tsre5/reterrain.html
Painting Terrain Heightmap.
If you want fixed depth, set your value in "C: Brush fixed heigth" and "D: Brush type - fixed height"
#5
Posted 17 February 2017 - 06:52 AM
I already have level crossing in ref files. Please give me a example to verify whether there is any error in the declaration.
#6
Posted 17 February 2017 - 07:09 AM
LevelCr ( FileName ( JP1CarCrossing.s ) Class ( "Track Objects" ) Description ( "Level Crossing (JP)" ) )
Make sure you have crossing shape file in shapes directory.
Page 1 of 1