Stadler GTW does not work in Open Rails

Stadler GTW does not work in Open Rails Rate Topic:

#1 Inactive_MaicoZee_*

Group: Status: Passengers (Obsolete)

Posted 13 July 2015 - 05:08 AM

Hi there,
I have a little problem with my Open Rails.
I wanted to go away by the Steadler GTW today made by Sjoerd Lafeber.
I started Open Rails and wanted gas. This unfortunately not worked and the train went very weird and ended in an error (see screenshot).

It comes to this train: http://forum.treinpu...=view;down=1783
Does anyone know what I can do, or can anyone solve/find out.

Best regards,
Maico Zeeman

PS: I also have my Open Rails log stamped.

Attached thumbnail(s)

Attached File(s)

OpenRailsLog.txt (33.21K)
Number of downloads: 186

This post has been edited by MaicoZee: 13 July 2015 - 05:22 AM

#2 ChrisD

Hostler

Group: Status: Active Member
Posts: 78
Joined: 19-March 13
Gender:Male
Simulator:OR
Country:

Posted 13 July 2015 - 09:29 AM

MaicoZee, on 13 July 2015 - 05:08 AM, said:

Problem verified.

I have downloaded the train set and experienced the same CTD when I tried to drive.

My Route is different from Yours, so it seems to be a wrong train parameter.

According to the logfile something is wrong with a coupler value.

I do not know enough about this to help You out. We will have to wait for the experts to help us here.

ChrisD

#3 cr-stagg

Foreman Of Engines

Group: Status: Contributing Member
Posts: 909
Joined: 16-May 05
Gender:Male
Simulator:OR
Country:

Posted 13 July 2015 - 11:58 AM

It would be easier to analyze if you would post a download of the ENG file.

#4 ChrisD

Hostler

Group: Status: Active Member
Posts: 78
Joined: 19-March 13
Gender:Male
Simulator:OR
Country:

Posted 14 July 2015 - 07:52 AM

cr-stagg, on 13 July 2015 - 11:58 AM, said:

It would be easier to analyze if you would post a download of the ENG file.

Here is one of the files I have tried, that crashed.

Hope this helps. :sign_welcome:

ChrisD

Attached File(s)

GTW_E1a.eng (36.7K)
Number of downloads: 171

#5 cr-stagg

Foreman Of Engines

Group: Status: Contributing Member
Posts: 909
Joined: 16-May 05
Gender:Male
Simulator:OR
Country:

Posted 14 July 2015 - 12:50 PM

Other than the Name, Description, and EngineOperatingProcedures parameters being out of place I see nothing wrong with the eng file. Try replacing it with this one.

Attached File(s)

GTW_E1a.eng (36.61K)
Number of downloads: 159

#6 cr-stagg

Foreman Of Engines

Group: Status: Contributing Member
Posts: 909
Joined: 16-May 05
Gender:Male
Simulator:OR
Country:

Posted 14 July 2015 - 01:00 PM

Just noticed something in the Coupling section: CouplingUniqueType ( "GTW" )

CouplingUniqueType –If a coupling has a CouplingUniqueType, it can only be coupled to other wagons with the same CouplingUniqueType

Does the rolling stock that is connected to this ENG have the same CouplingUniqueType? Try removing that line or just comment it out.

#7 slipperman

Foreman Of Engines

Group: Status: Contributing Member
Posts: 762
Joined: 09-February 12
Gender:Male
Location:North Nottinghamshire
Simulator:MSTS & ORTS
Country:

Posted 14 July 2015 - 01:29 PM

Hi,
The message is " Coupler overloaded".
The problem is with the Friction parameters in GTW1a.eng, GTW1b.eng and GTW1c.eng.
They are :

Quote

Friction (
327.7N/m/s -0,05 1.0mph 1.357N/m/s 1.92
5.1N/rad/s 1 -1rad/s 0 1
)

If the -0,05 value is changed to 0.05 (as in all the other vehicles), it works OK.

It's another of those little things that MSTS ignores!!

Cheers,
Ged

EDIT : Also applies to GTW_E1a.eng, GTW_E1b.eng and GTW_E1c.eng - apologies for the omission!!

#8 captain_bazza

Chairman, Board of Directors

Group: ET Admin
Posts: 13,928
Joined: 21-February 06
Gender:Male
Location:Way, way, way, South
Simulator:MSTS & OR
Country:

Posted 14 July 2015 - 08:57 PM

Classic case of MSTS has the last laugh.

CB.

Page 1 of 1

You cannot start a new topic
You cannot reply to this topic

Elvas Tower: Stadler GTW does not work in Open Rails - Elvas Tower