Elvas Tower: Very big Problem - Elvas Tower

Jump to content

  • 3 Pages +
  • 1
  • 2
  • 3
  • You cannot start a new topic
  • You cannot reply to this topic

Very big Problem Stopped locomotive Rate Topic: -----

#1 User is offline   delay 

  • Fireman
  • Group: Status: Inactive
  • Posts: 106
  • Joined: 07-June 14
  • Gender:Male
  • Simulator:Open Rails with MSTS
  • Country:

Posted 03 October 2014 - 12:48 PM

Hello, i have problem. See image I will try to describe the problem.
http://jpeg.cz/images/2014/10/03/6t2N.jpg
Hrac -> Player
Locomotive -> PKP EP09

Player its me. I wait while Retired / leaves locomotive PKP EP09.
This locomotive it´s traffic. I built signal at shift.
Problem is it that locomotive standing.

Player locomotive wait while locomotive PKP leaves.

Here is a preview in Train SImulator editor and thools,
In Open rail it does not work. (sorry for music down volume) :pardon:

https://www.youtube....eature=youtu.be

I do not understand what is wrong.
I hope you'll understand ;) :curiousPC:

#2 User is offline   delay 

  • Fireman
  • Group: Status: Inactive
  • Posts: 106
  • Joined: 07-June 14
  • Gender:Male
  • Simulator:Open Rails with MSTS
  • Country:

Posted 05 October 2014 - 01:55 AM

Sorry FOR typo. the name of the topic should be a big problem. I do not understand this error or perhaps something else to describe it ?

Thx :rotfl:

#3 User is offline   markus_GE 

  • Executive Vice President
  • PipPipPipPipPipPipPipPipPip
  • Group: ET Admin
  • Posts: 4,862
  • Joined: 07-February 13
  • Gender:Male
  • Location:Leoben, Styria, Austria, Europe
  • Simulator:ORTS / MSTS
  • Country:

Posted 05 October 2014 - 02:03 AM

YOu can still edit the topic title by clicking "Edit" for the first post in a topic you started. Editing that post should also allow you to edit the topic title.

Cheers, Markus

#4 User is offline   delay 

  • Fireman
  • Group: Status: Inactive
  • Posts: 106
  • Joined: 07-June 14
  • Gender:Male
  • Simulator:Open Rails with MSTS
  • Country:

Posted 05 October 2014 - 06:09 AM

I click the edit and I not have option for edit title topic :lol:

Please moderators edit me topic at " The Big Problem " :rotfl:

#5 User is offline   markus_GE 

  • Executive Vice President
  • PipPipPipPipPipPipPipPipPip
  • Group: ET Admin
  • Posts: 4,862
  • Joined: 07-February 13
  • Gender:Male
  • Location:Leoben, Styria, Austria, Europe
  • Simulator:ORTS / MSTS
  • Country:

Posted 05 October 2014 - 12:27 PM

You should have got a screen like when you start a new topic, with the title and description boxes above the main box for entering the post.

Anyway, did it for you, so anybody can understand what this is about.

Cheers, Makrus
Admin

#6 User is offline   delay 

  • Fireman
  • Group: Status: Inactive
  • Posts: 106
  • Joined: 07-June 14
  • Gender:Male
  • Simulator:Open Rails with MSTS
  • Country:

Posted 15 October 2014 - 01:52 AM

Hi, the problem still persists . Adds a log file .
Yes missing SOUND, It was my fault.

Attached File(s)


#7 User is offline   Csantucci 

  • Member, Board of Directors
  • Group: Status: Elite Member
  • Posts: 7,009
  • Joined: 31-December 11
  • Gender:Male
  • Country:

Posted 16 October 2014 - 02:13 AM

If this is a freeware route, where can it be downloaded? Could you prepare a test activity with only player train and failing train, with original MSTS trainsets?

#8 User is offline   delay 

  • Fireman
  • Group: Status: Inactive
  • Posts: 106
  • Joined: 07-June 14
  • Gender:Male
  • Simulator:Open Rails with MSTS
  • Country:

Posted 17 October 2014 - 10:55 PM

This route its here http://www.trat321.cz/ but route must bay. ( or finding or torrent- exist) or ask the author to send you a free track due to testing and such compatibility.
Trainset not original. My trainset have 14GB. But a send .eng file or consist?

This problem at acktivity. My train (player) have problem calling-on signal. Screen in the center of the image.
calling-on signal - red light and flashing white.
http://jpeg.cz/images/2014/10/18/gpmzP.jpg

#9 User is offline   Csantucci 

  • Member, Board of Directors
  • Group: Status: Elite Member
  • Posts: 7,009
  • Joined: 31-December 11
  • Gender:Male
  • Country:

Posted 18 October 2014 - 11:56 PM

Hi delay,
before I start, I have to understand a thing.
In post #1 you write "Problem is that locomotive is standing".
In post #6 you attach an OpenRailsLog.txt file where a crash occurs.
They seem two different problems. Or not?

Referring to trainset, I don't ask you for your TRAINSET folder. If you are able to use the MSTS Activity Editor, I ask you to prepare a test version of the failing activity, where you replace the locos and wagons with locos and wagons that are present in the original installation of MSTS, so that I don't need to download all locos and wagons needed to run the activity. This test version of the failing activity may have only the trains needed to reproduce your problem.

#10 User is offline   roeter 

  • Vice President
  • Group: Status: Elite Member
  • Posts: 2,426
  • Joined: 25-October 11
  • Gender:Male
  • Country:

Posted 20 October 2014 - 06:45 AM

If you press F5, you will get the HUD display.
If you then press SHIFT-F5 a couple of times, you will get the Dispatcher Info display.
This shows how routes are defined for all trains.

Could you please make and upload a screen-dump showing the Dispatcher Info when the engine is stuck, and also indicate which train as shown in the Dispatcher Info is the that engine?

That will give us some idea of what may be happening.

Regards,
Rob Roeterdink
  • 3 Pages +
  • 1
  • 2
  • 3
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users