[Fablok]

Hello. In German Pro Train series I have something like this. The semaphore shapes are not displayed. Not all but specific one. What could be the problem? Log is clear. No problems. Screen below. Only lights but no semaphore.

http://wstaw.org/m/2014/07/12/Nowy_obraz_mapy_bitowej.jpg

[jkcooney]

I have a similar issue with the second (distant) blade on my signal gantry installation... blade disappears.... also on ground mast signals similar to yours
both blades appear but only the upper (home) blade shows correct indication. Problems with signaling are a known issue I am told. These are signals prepared
by Joseph Hovet (JJH) and work just fine in MSTS but not in OR.

[eugenR]

Is the animated part of the signal only not to see, when the signal shows free, or also not in the stop-state?

[Rogue]

eugenR, on 26 July 2014 - 11:57 AM, said:

Is the animated part of the signal only not to see, when the signal shows free, or also not in the stop-state?

It differs....as you can see from my picture, the semaphore shape is visible but the gantry is missing. Some meters before it's the other way round (and some are ok as well).
So it seems that there's no difference between the animated part or the 'Gantry-Part'. The error still occurs when the signal switches lights.
But I can't see any obvious pattern when a faulty signal is shown and when not.
And the problem exists in most Pro Train AddOns (my picture is from PT10 Deluxe).

[Fablok]

And You have log clear of any errors. This is very irritating error. Guys with PT I have question. Check any activity with S-Bahn Berlin and tell me that if You have to long loading times. It seems that all schedule must be reedited ...

[eugenR]

OOps, you have problems not with old semaphores with animated arms!!
This are all signals with lights no animation

[Rogue]

eugenR, on 27 July 2014 - 03:19 AM, said:

OOps, you have problems not with old semaphores with animated arms!!
This are all signals with lights no animation

The old mechanical semaphores are also a problem in some PT Addons.
This picture is taken from PT Kreuztal - Marburg and most of the signals show an incorrect arm position (at the left signal the arm should be horizontal and at the right signal in a 45° degree).
Furthermore most of the signal-animations don't work.

[copperpen]

The missing signal posts are also a problem with the Severn Valley pay route. These are semaphore as well.

[eugenR]

Rogue, on 27 July 2014 - 05:42 AM, said:

The old mechanical semaphores are also a problem in some PT Addons.
This picture is taken from PT Kreuztal - Marburg and most of the signals show an incorrect arm position (at the left signal the arm should be horizontal and at the right signal in a 45° degree).
Furthermore most of the signal-animations don't work.

I think this Problem were been reported here:
https://bugs.launchp...or/+bug/1214052
in august last year, but until jet nobody has found a solution?

[Fablok]

Also this semaphore have display error. 2 should show signal form semaphore 1. So You have Stop signal as "clear" and clear as "stop"

http://wstaw.org/m/2014/07/28/Nowy_obraz_mapy_bitowej.jpg