X2261, X2259 - In a consist with three head-end locomotives, if the cabview is switched (Ctrl-E) from the original front locomotive to the rear locomotive, the brakes (Loco and Train) do not respond.
Note -if you start the the train moving while in the 3rd loco, you cannot stop to transfer back to the front loco!
Releases X2167 and X2137 (the earliest that I currently have) work normally.
I have tried two different routes and two different sets of diesel locomotives - same behavior. Flipping the third loco has no effect.
Cheers,
Sid
(P.S. Submitted to Launchpad as a bug)
Page 1 of 1
TripleHeader 3rd Loco Brakes Do Not work
Page 1 of 1