Elvas Tower: 3DTrains Surfliner Brake Issue - Elvas Tower

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

3DTrains Surfliner Brake Issue Rate Topic: -----

#1 User is offline   Surfliner6908 

  • Apprentice
  • Group: Status: Dispatcher
  • Posts: 34
  • Joined: 22-December 12
  • Gender:Male
  • Simulator:Open Rails
  • Country:

Posted 15 March 2014 - 09:08 PM

Hi Everybody,
It appears that on all 3DTrains Pacific Surfliner equipment there is a problem with both brakes in the cabview. The independent is always stuck at full, even when released, and the Train Brake is backwards. (Emergency - Released and vice versa) Could someone find out what causes this problem?

http://hostthenpost.org/uploads/afe1a487db9a10901933f1b2df612b90.pnghttp://hostthenpost.org/uploads/01876aebbc2382fb0ef09d315ea3ee44.png

#2 User is offline   Matej Pacha 

  • Engineer
  • Group: Status: Contributing Member
  • Posts: 571
  • Joined: 08-December 10
  • Gender:Male
  • Location:Slovakia
  • Country:

Posted 15 March 2014 - 11:00 PM

Hi, your train is obviously 3rd party product. It would be helpful for us to have the train installed. Or, at least the ENG file. Would you mind to post here a download link or the ENG and CVF file?
One issue is the brake pressure. The other issue is the brake lever position.
Thanks,
Matej

#3 User is offline   Surfliner6908 

  • Apprentice
  • Group: Status: Dispatcher
  • Posts: 34
  • Joined: 22-December 12
  • Gender:Male
  • Simulator:Open Rails
  • Country:

Posted 16 March 2014 - 09:39 AM

I just want to be sure it's okay to post the eng. file of a payware product here.

#4 User is offline   That Genset Foamer 

  • Superintendant
  • Group: Status: Inactive
  • Posts: 1,459
  • Joined: 14-September 12
  • Gender:Male
  • Location:Somewhere on the ATSF 4th District
  • Simulator:OpenRails
  • Country:

Posted 16 March 2014 - 02:12 PM

IIRC the 3DTrains policy is that you can post anything but the shape files. However Marc Nelson is on this forum and goes by "Hack". Pop him a message and he might be able to get everything squared away...

#5 User is offline   ATW 

  • Engineer
  • Group: Status: Contributing Member
  • Posts: 642
  • Joined: 07-January 13
  • Gender:Male
  • Simulator:MSTS Open Rails
  • Country:

Posted 16 March 2014 - 02:49 PM

Can it be a possible cvf graphic setting issue and not just a eng file thing?

Some graphics like 3dtrains brake could be a ace file in cab editor maker was set to start box at a point to go backwards that ORTS is reading the cvf different then MSTS does.

#6 User is offline   Surfliner6908 

  • Apprentice
  • Group: Status: Dispatcher
  • Posts: 34
  • Joined: 22-December 12
  • Gender:Male
  • Simulator:Open Rails
  • Country:

Posted 17 March 2014 - 07:13 PM

I messaged Marc and he granted me permission to upload the .cvf and .eng files.

EDIT: The method I used for uploading the files didn't work. Could somebody brief me on how to upload .cvf and .eng files?

#7 User is offline   copperpen 

  • Executive Vice President
  • Group: Status: Elite Member
  • Posts: 3,144
  • Joined: 08-August 05
  • Gender:Male
  • Simulator:MSTS & OR
  • Country:

Posted 18 March 2014 - 01:52 AM

Archive them as a zip or rar first. Then use the full editor to attach them to your post.

#8 User is offline   Surfliner6908 

  • Apprentice
  • Group: Status: Dispatcher
  • Posts: 34
  • Joined: 22-December 12
  • Gender:Male
  • Simulator:Open Rails
  • Country:

Posted 20 March 2014 - 11:05 PM

With Marc's permission, here is a .eng and a .cvf from both cab car and engine.

Attached File(s)


#9 User is offline   Surfliner6908 

  • Apprentice
  • Group: Status: Dispatcher
  • Posts: 34
  • Joined: 22-December 12
  • Gender:Male
  • Simulator:Open Rails
  • Country:

Posted 23 March 2014 - 12:27 AM

This is just a bit of a bump so that more people can see this. Has anybody looked at and/or found any errors inside the files I posted?
Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users