A question about custom resolutions Adding other resolutions in the options menu
#1
Posted 03 February 2014 - 06:05 AM
I have a question about custom resolutions, and the possibility of adding some of the more commonly used to the options panel, on a permanent basis.
I'm using Railworks alongside MSTS/OR, and when a new custom resolution is being made in the NVidia control panel, it is automatically added as a useable resolution to/in the Railworks's settings.
I might be an oddball, but I never did fancy 16:9 or 16:10 aspect ratios in train simulators, I prefer 5:4 or 4:3 ratios.
Instead of having to tamper with settings and creating workarounds, would it be possible for the development team to ad some additional resolutions to the OR options panel/Video/window size.
I was thinking about the 4:3 aspect ratio resolution of 1440x1080, the 5:4 of 1920x1440 and the 16:9 aspect ratio of 3840x2160, (just to be able to try OR in that resolution).
Regards Claus
#2
Posted 03 February 2014 - 06:12 AM
I'll see if there's a reasonably easy way to list resolutions.
#3
Posted 03 February 2014 - 06:16 AM
James Ross, on 03 February 2014 - 06:12 AM, said:
I'll see if there's a reasonably easy way to list resolutions.
Thank you for a lightning fast reply James :(.
I will give it a try :).
Regards Claus
#4
Posted 03 February 2014 - 06:34 AM
http://imageshack.com/a/img547/937/eu5i.jpg
http://imageshack.com/a/img856/7451/a64f.jpg
Regards Claus
#5
Posted 03 February 2014 - 06:56 AM
#6
Posted 03 February 2014 - 07:02 AM
railguy, on 03 February 2014 - 06:56 AM, said:
Hi railguy :(,
As far as I know, theres no solution to your problem with the stretched/distorted cabview.
It's a side effect of running OR in 16:9 or 16:10 aspect ratios.
Regards Claus
#7
Posted 03 February 2014 - 07:50 AM
railguy, on 03 February 2014 - 06:56 AM, said:
MSTS only supported 4:3 resolutions, so all cab views are 4:3. When you display it at something other than 4:3, the only options are to distort it, oversize it, or have holes at the edge. Open Rails defaults to oversizing it, letting you pan up/down with the respective arrow keys. You can change this in the options.
#8
Posted 03 February 2014 - 09:05 AM
James Ross, on 03 February 2014 - 07:50 AM, said:
OR supports cabviews of any size or aspect ratio, I do mine at 2560x1600, ie 16x10, I agree though cabviews would be better and easier to do at an aspect ratio of 4x3 only hires monitors are not availible at these ratios.
#9
Posted 03 February 2014 - 11:51 AM
#10
Posted 03 February 2014 - 12:07 PM