[Claude350]

 R H Steele, on 02 February 2014 - 04:39 PM, said:

The attached zip has the edited cnbala2 sigscr.dat file and in the folder named "default sigscr_dat" is the original unedited sigscr.dat file. Remember, for the activity to load with the player train in Auto Mode you have to make the start time change to AI train 9F (CP_110_AI) -- from 14:55:0 to 15:01:0.

Thanks for the update. I'll give it a try and report back.

[Claude350]

BTW are you using the modified activity that was posted here with the edited sigscr?

[R H Steele]

 Claude350, on 03 February 2014 - 03:47 PM, said:

BTW are you using the modified activity that was posted here with the edited sigscr?

If you are referring to the modified activity I made "cn_m314.zip", yes. This is not necessary and may only serve to confuse. Reference is made in this activity to switching between Auto and Manual and tabbing through some signals. With the Rob's sigscr.dat edit this is no longer necessary. I would suggest just doing the sigscr.dat edit and change the start time of Train F9. The activity will run nicely in auto mode with all the AI meets. Signaling will be correct. Have fun!

[Claude350]

Working good so far.

[jpmackay]

I know this messages about the problem with signals for cnbalav2 are old but I need help and not quite sure what Rob Roeterdink say in his message #35 right here above. One part I was not sure if I have to delete the whole thing in second part with " The line must be removed to maintain the rest of the "if" statement, which now should look like : " or not.

No problem with the first part to delete the line but not sure about the second part.

Let me know about this please.

Thank you,

John

[R H Steele]

 jpmackay, on 12 February 2019 - 12:52 PM, said:

I know this messages about the problem with signals for cnbalav2 are old but I need help and not quite sure what Rob Roeterdink say in his message #35 right here above. One part I was not sure if I have to delete the whole thing in second part with " The line must be removed to maintain the rest of the "if" statement, which now should look like : " or not.

No problem with the first part to delete the line but not sure about the second part.

Let me know about this please.

Thank you,

John

Hi John, see my post#49, just download zip file and paste contents into your copy of CNBalaV2 route, this will make all the correct changes to the sigscr.dat file and also give you a copy of the original default file in a folder.

[roeter]

 R H Steele, on 12 February 2019 - 01:39 PM, said:

Hi John, see my post#49, just download zip file and paste contents into your copy of CNBalaV2 route, this will make all the correct changes to the sigscr.dat file and also give you a copy of the original default file in a folder.

Updated signal files for Bala2 are on their way shortly, probably ready by tomorrow.

Regards,
Rob Roeterdink

[jpmackay]

Thank you Rob and no hurry to get your files when you are ready to release.

Take care Rob,

John