I am current driving the various scenarios in the SimTrain.ch's Bernina Express. The route is great, especially if you like Swiss metre-gauge.
Using the normal keys to release the Train Brake on these electric locs and railcars takes quite a long press on the key. Is it possible to speed this up at all. I have tried changing the Brake Pipe Charging Rate in Options but it does seem to make much difference.
Thanks
Dave
Page 1 of 1
Train Brake Release
#2
Posted 09 August 2013 - 12:25 AM
Try these templates on some of your locos in consist or try at least one by copying and paste in eng files under name and above Description(
AirBrakeMainresvolume ( 10.2 )
MainResChargingRate ( 3.6 )
BrakePipeChargingRate ( 60 )
EngineBrakeReleaseRate ( 38 )
EngineBrakeApplicationRate ( 34 )
BrakePipeTimeFactor ( 0.000323 )
BrakeServiceTimeFactor ( 1.46 )
BrakeEmergencyTimeFactor ( .15 )
AirBrakeMainresvolume ( 10.2 )
MainResChargingRate ( 3.6 )
BrakePipeChargingRate ( 60 )
EngineBrakeReleaseRate ( 38 )
EngineBrakeApplicationRate ( 34 )
BrakePipeTimeFactor ( 0.000323 )
BrakeServiceTimeFactor ( 1.46 )
BrakeEmergencyTimeFactor ( .15 )
#3
Posted 09 August 2013 - 02:52 AM
The times reflect that of the prototype brake action.
Cheers Bazza
Cheers Bazza
Page 1 of 1