Thank you very much, take care of the problem, the resolution cab was small, so the numbers were very large. :sweatingbullets:
OR x.1680: A few questions ... and praise!
#12 Inactive_Alexander_*
Posted 17 July 2013 - 09:04 AM
OpenRails x1680, settings for diesel smoke.
DieselSmokeEffectInitialMagnitude (10)
DieselSmokeEffectMaxMagnitude (10)
DieselSmokeEffectInitialSmokeRate (0)
DieselSmokeEffectMaxSmokeRate (15)
Parameter: DieselSmokeEffectInitialSmokeRate (0)
At idle should not be smoke, but it is. This is a bug or so conceived?
http://savepic.org/4041516m.png
DieselSmokeEffectInitialMagnitude (10)
DieselSmokeEffectMaxMagnitude (10)
DieselSmokeEffectInitialSmokeRate (0)
DieselSmokeEffectMaxSmokeRate (15)
Parameter: DieselSmokeEffectInitialSmokeRate (0)
At idle should not be smoke, but it is. This is a bug or so conceived?
http://savepic.org/4041516m.png
#14 Inactive_Alexander_*
Posted 17 July 2013 - 09:17 AM
Quote
Yes, there is a bug being solved right now...
Thank you :oldstry:
#15
Posted 17 July 2013 - 09:26 AM
Does this also concern the sometimes patchy-appearing diesel smoke on locos that would Show Show it normal in MSTS but like in the Video in ORTS?
Cheers, Markus
Cheers, Markus
#16 Inactive_Alexander_*
Posted 17 July 2013 - 09:42 AM
In order not to have these spots, add smoke to the parameters and make the stream of smoke on broader.
options:
0.25 is responsible for setting the thickness of the smoke plume.
options:
( DieselSpecialEffects ( Exhaust1 ( 0 5.25 -0.51 0 0.5 0 [b]0.25[/b]
0.25 is responsible for setting the thickness of the smoke plume.
#17
Posted 17 July 2013 - 10:03 AM
You mean, at which rate the singel smoke patches will appear? Seems a bit controversial to me, as the value for the loco shown is already at 0.7 (DieselSmokeInitialRate (0.7)
Or do you mean another line?
Cheers, and thanks so far, Markus
Or do you mean another line?
Cheers, and thanks so far, Markus
#18 Inactive_Alexander_*
Posted 17 July 2013 - 10:19 AM
DieselSmokeEffectInitialSmokeRate parameter is responsible for the amount of smoke at idle, it should be 0
My usual setup for smoke OR (looks more natural):
DieselSmokeEffectInitialMagnitude (10)
DieselSmokeEffectMaxMagnitude (10)
DieselSmokeEffectInitialSmokeRate (0)
DieselSmokeEffectMaxSmokeRate (15)
My usual setup for smoke OR (looks more natural):
DieselSmokeEffectInitialMagnitude (10)
DieselSmokeEffectMaxMagnitude (10)
DieselSmokeEffectInitialSmokeRate (0)
DieselSmokeEffectMaxSmokeRate (15)
#19
Posted 17 July 2013 - 10:32 AM
I will try that and see what Comes out. This loco has already caused more than one or two small bugs...
Cheers, and :oldstry: again, Markus
Edit: Yeah, Looks a lot better now. Thanks again for helping me to finally sort this out :rotfl:
Cheers, and :oldstry: again, Markus
Edit: Yeah, Looks a lot better now. Thanks again for helping me to finally sort this out :rotfl: