OK, its probably me but I can't get the keypad keys to work, with or without "Alt". It has been a while since I've run OR so I have the quick start guide in front of me. I am using V. 0.8.0.1251.
I exited OR and opened Word to make sure it wasn't my keyboard. The keypad worked fine in Word. Got right back into OR and nothing . . . .
What am I missing? :pleasantry:
Bill
Page 1 of 1
Numeric Keypad doesn't work in OR
#2
Posted 24 April 2013 - 08:03 PM
Never mind!!! I found the new key assignments.
Bill :naughty: :pleasantry:
Bill :naughty: :pleasantry:
#3
Posted 25 April 2013 - 06:39 AM
If you´r talking about the whole keyboard of the computer, try to set up your own key assignments in the options window of the latest experimental - don´t know, if this has already been possible in the latest stable release.
If your talking about the number block at the right side of the keyboard, you need to press the "Num" key to turn of the number pad function, then it will just work as it should in OR (you can usually check i it is turned on by a LED somewhere on the keyboard)
If your talking about the number block at the right side of the keyboard, you need to press the "Num" key to turn of the number pad function, then it will just work as it should in OR (you can usually check i it is turned on by a LED somewhere on the keyboard)
#4
Posted 27 April 2013 - 04:01 AM
If you're trying to manipulate the camera with the numeric keypad, you'll need NumLock off I believe. Otherwise it just types numbers. The non-numpad keys will always work, though (home, end, page up/down, etc.).
Page 1 of 1