Log In
Register Now!
Help
I doubt developing an new shape would require any additional licenses. Only distributing an existing shape with a specific license would require that license.
Superelevation
Rate Topic:
#96
- Vice President
-
- Group: Posts: Elite Member
- Posts: 2,019
- Joined: 27-October 12
- Gender:Male
- Location:Budapest
- Simulator:OpenRails
-
Country:
Posted 01 November 2014 - 07:37 AM
#97
- Apprentice
-
- Group: Posts: Switchman
- Posts: 3
- Joined: 08-February 21
- Gender:Male
- Simulator:Open Rails
-
Country:
Posted 08 February 2021 - 06:32 PM
Csantucci, on 23 March 2013 - 04:41 AM, said:
Thank you for this valuable info. Using it and your .stf template file I was able to create a (rought by the moment) profile for the NG Bernina route.
Bernina_profile.jpg
Bernina_profile.jpgsir, sorry to bother you, I was informed from the open Rails page to contact you to ask how to put the cant on the 1000mm superelevation, look in the forum, but the links I found were down .. I hope you can help, Regards.
This post has been edited by fakugubana93: 08 February 2021 - 06:33 PM
#98
- Member, Board of Directors
-
- Group: Posts: Elite Member
- Posts: 7,687
- Joined: 31-December 11
- Gender:Male
-
Country:
Posted 09 February 2021 - 10:31 AM
The links in this thread work. Probably you are not allowed to download, because you have too few posts.
#99
- Apprentice
-
- Group: Posts: Switchman
- Posts: 3
- Joined: 08-February 21
- Gender:Male
- Simulator:Open Rails
-
Country:
Posted 09 February 2021 - 02:36 PM
Csantucci, on 09 February 2021 - 10:31 AM, said:
The links in this thread work. Probably you are not allowed to download, because you have too few posts.
Hello, the translator I use is capable, but for the superelevation to work on the metric gauge 1000mm, which is exactly what I have to download? I hope your help!
#100
- Member, Board of Directors
-
- Group: Posts: Elite Member
- Posts: 7,687
- Joined: 31-December 11
- Gender:Male
-
Country:
Posted 09 February 2021 - 03:33 PM
You have a PM.
#101
- Fireman
-
- Group: Posts: Active Member
- Posts: 241
- Joined: 11-March 21
- Gender:Male
- Simulator:Open Rails
-
Country:
Posted 30 January 2025 - 07:40 PM
Does anyone have an idea what trackprofile i would use to avoid flat tracks in 3D Trainsimstuff routes? I have put this trackprofile in but dynamic track stays flat. I also tried the DB tracks update for the Donner route but while it looks good on the surface that ruined all the switches. I really HATE the track hovering 2 feet above the terrain.