[captain_bazza]

http://www.elvastowe...eenshot&id=1468
File Name: Baldwin Mogul: M&U RR #5 + slopeback tender
File Submitter: captain_bazza
File Submitted: 11 Sep 2012
File Updated: 12 Sep 2012
File Category: Steam Locos Std Gauge

Baldwin Locomotive and Slope Back Tender
Type Mogul (2-6-0)
Standard Gauge
Middleton and Unionville RR
Built 1920
Scrapped circa 1951

© Captain Bazza (2011)

For Open Rails only (It will not run in MSTS)

Release V1.0 11 Sept 2012

-----------------------------------------------------------------------
Many thanks to WalterC for suggesting ;-) this
locomotive project, and for his ongoing help
with research and his encouragement.

I therefore dedicate this model to Walter, for
without his enthusiastic support this interesting
little locomotive would not have been 'reborn'.
------------------------------------------------------------------------

This lightweight Mogul from Baldwin was unique,
with its relatively low slung cab, which gives it a
sort of nice 'hunkered down' look.

------------------------------------------------------------------------

Please be aware that Open Rails is an on-going
project and over time some old features might not
work and new features will be added which could
affect these models. Such progress is out of my
control, but I may at some stage produce an
upgraded model taking these matters into
consideration.

The model is complex, with high polygon detail.
It has been beta tested in OR beta 1212 and runs
without a problem.

-------------------------------------------------------------------------

Unfortunately, due to its complexity, this model set
will not load into the default MSTS Activity Editor.

You will need a third party consist editor.

--------------------------------------------------------------------------

If you encounter any problems please use the
model's support page, or PM me.

--------------------------------------------------------------------------

EULA: Just respect the model's integrity, thanks.

Cheers Captain Bazza (Barry R Munro)
11 September 2012

Click here to download this file

[thegrindre]

How about updating the pic with a, OR only logo? :oldstry:

:pardon:

[Mipman25]

Did the real M&U 5 have no lettering on the tender?

[captain_bazza]

@ Rick....oh, darn it. I uploaded it late, will fix. Thank you. (Edit: pic now OR labeled.)

@ Dustin....I chose not to put a logo on the tender, this makes it more flexible for use with other locomotives, plus many Baldwins, specially switchers, used them. If you want a particular road I could make a decal up for you. I'd need to put a polygon on either side of the tank, but that's no biggie problem.

Cheers Bazza

[captain_bazza]

Heck, Walter, I thought for a moment you'd coupled up the Inviso-tender by mistake! :scarerun:

Cheers Bazza

[thegrindre]

Walter,
Pix are not allowed in this support thread.
I can't see your pix.

:scarerun:

[captain_bazza]

Hmmm, strange, I wonder if they are in another thread, because I've seen them. I really must go to bed earlier than I do. :Neeeedsleeep:

Cheers Bazza