[timmuir]

http://www.elvastowe...reenshot&id=785
File Name: PACIFIC ELECTRIC "TENS" ADD-ON FILES FOR TWO REVERSED CARS
File Submitter: timmuir
File Submitted: 24 Aug 2009
File Category: Trolleys & Subways

PACIFIC ELECTRIC "TENS" ADD-ON FILES FOR TWO REVERSED CARS.
DROP-IN FILES FOR PE 1009 AND 1032.
6.2 and 7.2 meter versions.
TSM-PRO 3D Models and Textures © 2009 Tim W. Muir
Fine Scale High Detail Construction

!!YOU MUST HAVE THE "PE-TENS" SET FOR THIS ARCHIVE TO WORK. THIS ARCHIVE IS AN ADD-ON TO THAT SET!!

INSTALLATION:

Just unzip to a temporary folder, move entire contents to your previously installed Trainset/PE-Tens folder, overwriting when prompted. Make a consist with your favorite Consist editor, then run.

MODEL INFORMATION:

Constructed using a modular and "stick-built" method. The curved quarter-panels on the ends made necessary many polygons to get the smooth round contours of the dasher and curved glass caracteristic of the "Herriman"-era cars on the PE and Los Angeles Railway (streetcar lines). Texturing of the car side is tiled across the length from a 256x256 map with road name and numbers applied separately. Renumbering is accomplished by repainting the appropriate maps:

Side numbers: 10011360.ace
End Numbers: 10**Fnum.ace (each car has it's own front number ace.)

The side texture (pe10side.ace) has been fixed to remove the dark vertical line every 15 boards (right-side edge of the texture, which is tiled on the mesh).

The folding door can be opened and closed by keying Ctrl+NumPad 8. The vestibule door is operated using the Ctrl+NumPad9 and the smoking section door is operated with Ctrl+NumPad7.

!!You must have at least Bin Patch v1.7.1022 installed in your MSTS root folder to use this model or you will get engine file errors!!


Tim Muir
Railroad Earth Models
August 22, 2009

Original File Name = PE1009_1032.zip

Click here to download this file