SACRAMENTO NORTHERN RAILWAY 62-TON 650 CLASS GE STEEPLE CAB #654
- File Name
- SACRAMENTO NORTHERN RAILWAY 62-TON 650 CLASS GE STEEPLE CAB #654 by timmuir
- Submitted
- 18 February 2009 - 07:24 PM
- Last Updated
- 20 December 2010 - 01:23 AM
- File Size
- 5.95MB (Estimated Download Times)
- Views
- 3110
- Downloads
- 34
- Support Topic
- Click here to visit support topic
SACRAMENTO NORTHERN RAILWAY 62-TON 650 CLASS GE STEEPLE CAB
Improved version.
6.2 and 7.2 Meter Wire Heights
3D MODEL AND TEXTURES ©2005, 2009 By Tim Muir
Cabview by Tim Muir, using elements from Wayne Campbell (Throttle) Bill Hall (Reverser) and Kenji Kimura (light switch).
Sounds by Chuck Zeiler.
!!You must have at least Bin Patch v1.7.1022 installed in your MSTS root folder to use this model or you will get engine file errors!!
Sacramento Northern's GE locomotives numbered SNRY 650 and 651 were ordered in 1923 at $42,283 each. They came equipped with radial shank couplers which made them slightly longer than most GE 50-60 ton steeple cabs, at 39-feet, 9-inches. They rode on GE 105A trucks with GE 251-A motors, were rated 880 tons and weighed about 62 tons. These locomotives were set up for both 600 and 1200 volts and rated at 1000 horse power. 652 and 653 were added in 1928 at a cost of $44,752 apiece, followed by 654 in 1930. Because of their roof-mounted air tanks, which reminded the crews of WW2 PT boats, the 650 class locomotives were nick-named 'Torpedoes'.
2005 Model rebuilt 2009 using TSMPro by Abacus ®. New information has come into my possession since the original model was made in 2005, so some details have been improved, corrected, or added. Also, new animations have been added for the trolley pole, pantograph, cab windows and bell.
To operate the left-hand window, hit: Ctrl+NumPad7.
To operate the right-hand window, hit: Ctrl+NumPad9.
You can raise and lower the auxiliary trolley pole by keying: Ctrl+NumPad8. However the pole is strictly for show and is not powered, so if the pantograph is not raised to the wire, you will not move.
!!You must have at least Bin Patch v1.7.1022 for these animations to work.!!
Also, with this issue, the bell is animated using the wiper control (V-key). I suggest hitting the V-key followed directly with the B-key+Shift to get the sound in sync with the animation. To turn it off reverse the procedure ( B-key - V-key).
Original File Name = SacramentoNorthern654.zip
Improved version.
6.2 and 7.2 Meter Wire Heights
3D MODEL AND TEXTURES ©2005, 2009 By Tim Muir
Cabview by Tim Muir, using elements from Wayne Campbell (Throttle) Bill Hall (Reverser) and Kenji Kimura (light switch).
Sounds by Chuck Zeiler.
!!You must have at least Bin Patch v1.7.1022 installed in your MSTS root folder to use this model or you will get engine file errors!!
Sacramento Northern's GE locomotives numbered SNRY 650 and 651 were ordered in 1923 at $42,283 each. They came equipped with radial shank couplers which made them slightly longer than most GE 50-60 ton steeple cabs, at 39-feet, 9-inches. They rode on GE 105A trucks with GE 251-A motors, were rated 880 tons and weighed about 62 tons. These locomotives were set up for both 600 and 1200 volts and rated at 1000 horse power. 652 and 653 were added in 1928 at a cost of $44,752 apiece, followed by 654 in 1930. Because of their roof-mounted air tanks, which reminded the crews of WW2 PT boats, the 650 class locomotives were nick-named 'Torpedoes'.
2005 Model rebuilt 2009 using TSMPro by Abacus ®. New information has come into my possession since the original model was made in 2005, so some details have been improved, corrected, or added. Also, new animations have been added for the trolley pole, pantograph, cab windows and bell.
To operate the left-hand window, hit: Ctrl+NumPad7.
To operate the right-hand window, hit: Ctrl+NumPad9.
You can raise and lower the auxiliary trolley pole by keying: Ctrl+NumPad8. However the pole is strictly for show and is not powered, so if the pantograph is not raised to the wire, you will not move.
!!You must have at least Bin Patch v1.7.1022 for these animations to work.!!
Also, with this issue, the bell is animated using the wiper control (V-key). I suggest hitting the V-key followed directly with the B-key+Shift to get the sound in sync with the animation. To turn it off reverse the procedure ( B-key - V-key).
Original File Name = SacramentoNorthern654.zip
Download File
Random Files
File Name: Rio Grande Southern Caboose 0401 In Category: NG Caboose |
File Name: PACIFIC ELECTRIC RAILWAY 64-TON FREIGHT LOCO #1601 In Category: Light Electrics |
Download Statistics
- Total Files
- 2,696
- Total Categories
- 135
- Total Authors
- 150
- Total Downloads
- 120,790
- Latest File:
- ORTS upgrade for some locomotives - WIP by Weter (submitted 11 April 2024 - 12:33 PM)
Comments