Pennsylvania_RR_M1_4-8-2_TSM resource kit
- File Name
- Pennsylvania_RR_M1_4-8-2_TSM resource kit by B & O GUY
- Submitted
- 23 May 2018 - 11:17 AM
- Last Updated
- 23 May 2018 - 11:17 AM
- File Size
- 2.14MB (Estimated Download Times)
- Views
- 1119
- Downloads
- 25
- Support Topic
- Click here to visit support topic
Pennsylvania_RR_M1_4-8-2_TSM resource kit
-----------------------------------------------------------------------------------
This kit includes a PRR M1 4-8-2 steam locomotive and the original
110P75 tender. The locomotive has animated rods.
The train phone radio gear was installed after 1946. To make an earlier
version of the M1, remove the radio gear and turn the water hatch
covers 90 degrees and deleat one of them. I believe the hatch opened
from the back to the front. The 25 M1's were converted to M1-A
specifications after 1946 but were still M1's to the Pennsy. RR fans
called these converted M1's M1-B's but the records show that not to be
true. Some had foot board pilots and some had the cast rounded pilot
while still other's retained their original slatted pilot. All recieved
feed water heater's. Some had dual air compressor's while others
retained a single compressor.
If your trying to model a specific numbered unit try to find good photo's.
I tried to animate the tender water scoop with the MirrorArmLeft
but was unsuccessful. The animations are still with this tender model.
-----------------------------------------------------------------------------------
Credits:
An Orginal Model by Allen Norton "Nortec"-B&O Guy"
Couplers, air hoses and pin puller's by "Tim Muir"
-----------------------------------------------------------------------------------
The model can be imported by 3DCanvas and possibly 3DCrafter
for use in those programs.
----------------------------------------------------------------------------------
No support is offered or will be given. Use the forum for questions.
----------------------------------------------------------------------------------
Legals:
Have fun and give proper credit.
I or we are not responsible for any damage to your computer or
programs because of you loading this file on or in your Train Sim
Modeler or 3DCanvas/Crafter. You bear the sole responsibility for
any problems you may encounter. Any other problems you may
encounter while modeling and texturing the model are and will be
considered part of your learning experience.
--------------------------------------------------------------
Model statistics;
No textures are included with this kit.
This model is intended for use in Open Rails
--------------------------------------------------------------------------------
If you need to contact me you may do so here at Elvas Tower.
Thank you
Allen Norton-"B&O Guy"
-----------------------------------------------------------------------------------
This kit includes a PRR M1 4-8-2 steam locomotive and the original
110P75 tender. The locomotive has animated rods.
The train phone radio gear was installed after 1946. To make an earlier
version of the M1, remove the radio gear and turn the water hatch
covers 90 degrees and deleat one of them. I believe the hatch opened
from the back to the front. The 25 M1's were converted to M1-A
specifications after 1946 but were still M1's to the Pennsy. RR fans
called these converted M1's M1-B's but the records show that not to be
true. Some had foot board pilots and some had the cast rounded pilot
while still other's retained their original slatted pilot. All recieved
feed water heater's. Some had dual air compressor's while others
retained a single compressor.
If your trying to model a specific numbered unit try to find good photo's.
I tried to animate the tender water scoop with the MirrorArmLeft
but was unsuccessful. The animations are still with this tender model.
-----------------------------------------------------------------------------------
Credits:
An Orginal Model by Allen Norton "Nortec"-B&O Guy"
Couplers, air hoses and pin puller's by "Tim Muir"
-----------------------------------------------------------------------------------
The model can be imported by 3DCanvas and possibly 3DCrafter
for use in those programs.
----------------------------------------------------------------------------------
No support is offered or will be given. Use the forum for questions.
----------------------------------------------------------------------------------
Legals:
Have fun and give proper credit.
I or we are not responsible for any damage to your computer or
programs because of you loading this file on or in your Train Sim
Modeler or 3DCanvas/Crafter. You bear the sole responsibility for
any problems you may encounter. Any other problems you may
encounter while modeling and texturing the model are and will be
considered part of your learning experience.
--------------------------------------------------------------
Model statistics;
No textures are included with this kit.
This model is intended for use in Open Rails
--------------------------------------------------------------------------------
If you need to contact me you may do so here at Elvas Tower.
Thank you
Allen Norton-"B&O Guy"
Download File
Random Files
File Name: MSTS NVLW BCOL SD40-2 Pack Fix In Category: Modern Diesels (Post - 1960) |
File Name: Polson-Rayonier Logging 2-8-0 #51 In Category: Steam Locos Std Gauge |
Download Statistics
- Total Files
- 2,696
- Total Categories
- 135
- Total Authors
- 150
- Total Downloads
- 120,809
- Latest File:
- ORTS upgrade for some locomotives - WIP by Weter (submitted 11 April 2024 - 12:33 PM)
Comments