Log In
Register Now!
Help
This was signalled in the Italian forum and is confirmed by my test.
Logfile showing rather suspect info is attached
OpenRailsLog_disruptedTrain.txt (39.04K)
Number of downloads: 137
Page 1 of 1
Disrupted train after restore in U2022.01.26-1022
Rate Topic:
#1
- Member, Board of Directors
-
- Group: Status: Elite Member
- Posts: 6,996
- Joined: 31-December 11
- Gender:Male
-
Country:
Posted 26 January 2022 - 08:56 AM
This is what is seen when st, as well as the actual master branch.
This was signalled in the Italian forum and is confirmed by my test.
Logfile showing rather suspect info is attached
OpenRailsLog_disruptedTrain.txt (39.04K)
Number of downloads: 137
This was signalled in the Italian forum and is confirmed by my test.
Logfile showing rather suspect info is attached
OpenRailsLog_disruptedTrain.txt (39.04K)
Number of downloads: 137
#2
- Engineer
-
- Group: Status: Contributing Member
- Posts: 548
- Joined: 04-April 14
- Gender:Male
- Simulator:MSTS & OR
-
Country:
Posted 30 January 2022 - 09:19 AM
Hi,
I have still the same problem with U2022.01.29-2137 on various routes and with various trains.
It is very bad when saving the actitivity and had already started to drive. Then there is a crash right at the start of the resumed activity.
OpenRailsLog.zip (7.43K)
Number of downloads: 130
Greetings
Jonas
I have still the same problem with U2022.01.29-2137 on various routes and with various trains.
It is very bad when saving the actitivity and had already started to drive. Then there is a crash right at the start of the resumed activity.
OpenRailsLog.zip (7.43K)
Number of downloads: 130
Greetings
Jonas
#3
- Engineer
-
- Group: Status: Contributing Member
- Posts: 548
- Joined: 04-April 14
- Gender:Male
- Simulator:MSTS & OR
-
Country:
Posted 31 January 2022 - 05:21 AM
The bug occurs since version U2022.01.16-1422.
It might have happened with the red marked pull request #564.
According to the version logs (Link here):
--------------------------------------------------------------------------------
U2022.01.16-1422 Open Rails Code Bot
2022-01-16 14:22:26
Automatic merge of T1.4-148-ge5d8f1cf2 and 9 pull requests
Pull request #525 at 614b22208: TCS extensions
Pull request #533 at 62a1c271c: fix for shapes hidden by animations( 0 )
Pull request #541 at febc6056c: Initial Virtual File System development
Pull request #545 at 3f57012c7: Fix VRAM usage
Pull request #560 at 46a143d10: https://blueprints.l...or-cab-controls , by Jindrich
Pull request #561 at 36dcd192a: Manual call-on is reset when passing an advanced signal - https://bugs.launchp...or/+bug/1955907
Pull request #562 at 44f35b4b7: Remove the locomotive handle from the script, because no interface function can allow access to any internal structure.
Pull request #564 at af9e9aecd: Added TCS parameters file path in consist files (+ refactoring and code cleanup)
Pull request #565 at ebcd9e87a: Correct Steam locomoti starting tractive effort.
--------------------------------------------------------------------------------
U2022.01.16-0907 Open Rails Code Bot
2022-01-16 09:07:14
Automatic merge of T1.4-132-g8ed228436 and 10 pull requests
Pull request #525 at 614b22208: TCS extensions
Pull request #533 at 62a1c271c: fix for shapes hidden by animations( 0 )
Pull request #541 at febc6056c: Initial Virtual File System development
Pull request #545 at 3f57012c7: Fix VRAM usage
Pull request #551 at 0aa1e46c9: Make handling the timetable-or extension consistent.
Pull request #559 at c7f1150bf: https://blueprints.l...tributed-power: Distributed power cab display and controls
Pull request #560 at 46a143d10: https://blueprints.l...or-cab-controls , by Jindrich
Pull request #561 at 36dcd192a: Manual call-on is reset when passing an advanced signal - https://bugs.launchp...or/+bug/1955907
Pull request #562 at 44f35b4b7: Remove the locomotive handle from the script, because no interface function can allow access to any internal structure.
Pull request #565 at ebcd9e87a: Correct Steam locomoti starting tractive effort.
--------------------------------------------------------------------------------
Link to the pull request #564 at GitHub here.
I could be wrong, but in my eyes it is the only pull request that has been added since the previous version U2022.01.16-0907.
It might have happened with the red marked pull request #564.
According to the version logs (Link here):
--------------------------------------------------------------------------------
U2022.01.16-1422 Open Rails Code Bot
2022-01-16 14:22:26
Automatic merge of T1.4-148-ge5d8f1cf2 and 9 pull requests
Pull request #525 at 614b22208: TCS extensions
Pull request #533 at 62a1c271c: fix for shapes hidden by animations( 0 )
Pull request #541 at febc6056c: Initial Virtual File System development
Pull request #545 at 3f57012c7: Fix VRAM usage
Pull request #560 at 46a143d10: https://blueprints.l...or-cab-controls , by Jindrich
Pull request #561 at 36dcd192a: Manual call-on is reset when passing an advanced signal - https://bugs.launchp...or/+bug/1955907
Pull request #562 at 44f35b4b7: Remove the locomotive handle from the script, because no interface function can allow access to any internal structure.
Pull request #564 at af9e9aecd: Added TCS parameters file path in consist files (+ refactoring and code cleanup)
Pull request #565 at ebcd9e87a: Correct Steam locomoti starting tractive effort.
--------------------------------------------------------------------------------
U2022.01.16-0907 Open Rails Code Bot
2022-01-16 09:07:14
Automatic merge of T1.4-132-g8ed228436 and 10 pull requests
Pull request #525 at 614b22208: TCS extensions
Pull request #533 at 62a1c271c: fix for shapes hidden by animations( 0 )
Pull request #541 at febc6056c: Initial Virtual File System development
Pull request #545 at 3f57012c7: Fix VRAM usage
Pull request #551 at 0aa1e46c9: Make handling the timetable-or extension consistent.
Pull request #559 at c7f1150bf: https://blueprints.l...tributed-power: Distributed power cab display and controls
Pull request #560 at 46a143d10: https://blueprints.l...or-cab-controls , by Jindrich
Pull request #561 at 36dcd192a: Manual call-on is reset when passing an advanced signal - https://bugs.launchp...or/+bug/1955907
Pull request #562 at 44f35b4b7: Remove the locomotive handle from the script, because no interface function can allow access to any internal structure.
Pull request #565 at ebcd9e87a: Correct Steam locomoti starting tractive effort.
--------------------------------------------------------------------------------
Link to the pull request #564 at GitHub here.
I could be wrong, but in my eyes it is the only pull request that has been added since the previous version U2022.01.16-0907.
#4
- Conductor
-
- Group: Status: Contributing Member
- Posts: 489
- Joined: 21-February 13
- Gender:Male
- Location:St Cyr l'Ecole (France)
- Simulator:Open Rails
-
Country:
Posted 05 February 2022 - 03:35 AM
The problem should be fixed in the next unstable version.
#5
- Member, Board of Directors
-
- Group: Status: Elite Member
- Posts: 6,996
- Joined: 31-December 11
- Gender:Male
-
Country:
Posted 05 February 2022 - 11:48 AM
Yes, it works here.
#6
- Engineer
-
- Group: Status: Contributing Member
- Posts: 548
- Joined: 04-April 14
- Gender:Male
- Simulator:MSTS & OR
-
Country:
Posted 05 February 2022 - 07:39 PM
Work for me too. Can load saved activities perfekt again. Thanks!
Page 1 of 1